How to remove a 2006 hhr aircompressor - 2006 Chevrolet HHR

They are usually behind the centre console and glove box

https://www.google.com/search?q=2006+Chevy+HHR+6%2C+2.4L.+replace+the+blend+door+actuator

..

https://www.autozone.com/repairguides/HHR-2006-2008/Fuel-Filter/Removal-Installation/_/P-0996b43f80cb2e21

https://www.bangshift.com/forum/forum/bangshift/tech-section/12586-fuel-filter-hhr

https://www.chevyhhr.net/forums/general-hhr-4/hhr-fuel-filter-replacement-59030/

https://www.chevyhhr.net/forums/how-tutorial-library-21/fuel-pump-replacement-36541/

It is built into the pump.

Auto Talk site online type in question start with oil pan removal.also ck youtube videos.

Starter located on the engine, from under car look between engine and radiator, where engine connects to transmission, that is the starter. Check links below, press the helpful button
Chevy HHR starter location and removal

Going under the Chevy HHR

How to Test and Troubleshoot Starter Problem

Time to replace starter 07 HHR 2 4L Chevy HHR Network

Here's a video that will show you exactly how to remove it from your car.

Check this out, this is how I changed mine
http://www.autozone.com/autozone/repairguides/HHR-2006-2008/Compressor/Removal-Installation/_/P-0996b43f80cb2d6b

Access to change the headlamp bulbs is through the wheel well. The recommended method is to remove the front tire and then the plastic inner fender liner. Once removed, you'll have easy (more or less) access to the rear of the headlamp housing.

It is located behind the glove box. You have to remove the glove box and there is a cover over the filter. Good luck

the power steering fluid resevoir is located on the passenger side of the engine compartment near the fire wall. mostimes in order to fill it you have to remove the altenator to remove the fill cap to add the fluid.

Turn your wheels in on the side that you are replacing, remove the two locking pins at the bottom side of the wheel well liner, pull the liner back and reach in to turn the bulb socket.