Removing Gorilla glue from micro wave door - Cars & Trucks

You will need to use acetone to clean from hard surfaces, Acetone and plastic do not like each other. Experience is an expensive lesson.

Might try pliers, but gorilla glue is actually so good that if you do not clean the cap and nozzle when you place the cap back on, it isn't coming back off.

have the bumper mounting points re welded or simply get another one from the wreckers
go on line to the glue manufacturer and find the product that is used to remove the glue

What glass, on which door?

Should be able to super glue it back down. I would use Gorilla Glue myself.

Try a product called Gorilla glue.

If you want to make it work. You can glue it on with various types of glue.

You might check online vendors or even better the dealer for new clips. If it is an entire piece with only two broken parts, it may be best to glue it or go to a junkyard.

are the buttons not working? test fuses and relays. are the buttons falling inside the door? gorilla glue it back in place. the curvy panel on the door with the handle pops off. there is a small groove near the top to help pry it off..

Super glue or clear Gorilla glue
RB

At the bottom of the door panel you will find several screws ( haven't removed mine in a few mo. and have forgotten how many ) there are also screws under the slotted bottom of the finger grip in the door panel. After removing screws lift the panel from the bottom and to the top of the door. You will encounter clips on the rear of the door panel the most problematic is by door locking mechanism. Use a small blade flat screwdriver to Gently prise the clip out of the metal door. To pass over the interior door handle piviot the door panel, Take Care the wires for window and door lock are located here!
I used Gorilla Glue to reseat my lock button be Cautious not to bind the lock button, or the function will be impaired ( won't work ) HAVE FUN