2005 Dodge Caravan Logo

Related Topics:

U No Posted on Dec 28, 2017

How do I get the MAF. sensor connector uncoupled on a dodge caravan 2005 3.8l v6

5 Related Answers

Anonymous

  • 39 Answers
  • Posted on Sep 25, 2008

SOURCE: 1997 Dodge caravan crank position sensor

it is located on the bellhousing of the transmission it gets its signal from the flywheel.look where the transmission bolts to the engine.

Ad

Anonymous

  • 90 Answers
  • Posted on Jan 31, 2009

SOURCE: replace spark plug 2003 dodge caravan v6

hi the front ones are not bad but the back ones you will have to get from under the van.( do them one at a time)

ginko

Ginko

  • 19396 Answers
  • Posted on Mar 30, 2009

SOURCE: Where is the MAF sensor on a 2003 Dodge Caravan?

The MassAirFlow sensor on a Dodge Caravan is usually mounted in the air intake between the air filter and the throttle body, located on the intake manifold.
Sometimes mass air flow sensors are mounted directly to the throttle body.

Anonymous

  • 158 Answers
  • Posted on Jul 02, 2009

SOURCE: I need the location of MAF sensor in a 1998 Dodge

Your vehicle dose not have a maf sensor. They used a map sensor it is on the engine located under the front of the breater where it attaches to the engine.

Patrick Rayome

  • 1757 Answers
  • Posted on Jun 06, 2010

SOURCE: firing order of 2003 dodge grand caravan

For the 2003 Dodge Caravan (and Grand Caravan) ALL 3.3L V6 Engines (including the Flex Fuel): Also for 3.8L V6 Engines:

Firing Order:
1-2-3-4-5-6

Cylinders:
........(back).......
|...1....3....5...|
______________
|...2....4....6...|

Ignition Coil:
.......(back)
electrical connection
...........|
..........V
5........1........3
2........4........6
.......(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer
0helpful
1answer

2001Dodge caravan 3.8L engine cranks but won't start, and dash lights and gauges go wacky

05 Dodge Caravan No Start P0688 bad wire - YouTube

? 10:49
www.youtube.com/watch?v=yshodC_crqo
Sep 22, 2012 - Uploaded by Brian Mann 2005 dodge caravan crank no start p0688 asd relay circuit ... butdoing the voltage drop on the back of the connector to the ipm to.... ECM PCM STARTER 2003 DODGE GRAND CARAVAN 3.3L V6 WONT START ... 1996, 97, 98 Dodge Caravan Starter install3.8L V6 - Duration: 8:39. by Gary O 4,364 views.
0helpful
1answer

Where is MAF sensor 1989 Dodge Caravan 3.0 ?

I believe this engine uses a MAP sensor instead of a MAF sensor. The Manifold Absolute Pressure sensor is located on the firewall on this vehicle with a vacuum line attached to it.
0helpful
2answers

Replace crankshaft position sensor in 2003 dodge caravan 3.3 V6

According to Haynes, the V6 engine has the sensor mounted in the bellhousing on the back of the engine.
0helpful
1answer

2003 dodge caravan code p171

Basically this means that an oxygen sensor in bank 1 detected a lean condition (too much oxygen in the exhaust). On V6/V8/V10 engines, Bank 1 is the side of the engine that has cylinder #1. In the vast majority of cases, simply cleaning the MAF sensor does the trick. Consult your service manual for it's location if you need help. I find it's best to take it off and spray it with electronics cleaner or brake cleaner. Make sure you are careful not to damage the MAF sensor, and make sure it's dry before reinstalling. check all vacuum hoses and pcv system, also check for dirty fuel filter or low fuel pressure. but clean maf sensor first and see if this helps. good-day !
4helpful
1answer

Need to find location of mass air flow meter 2000 dodge caravan 3.3 v6

Chrysler does not use a (MAF) Mass Air Flow sensor. They use a MAP ( Manifold Absolute Pressure) sensor.

It is located on the intake manifold near where the throttle body bolts to it.
airjer995_18.jpg

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

1helpful
1answer

I tow my '98 Dodge Grand Caravan behind my motor home. When I arrive at my destination and uncouple the van, it won't start. I have to wait an hour or so and then it will start. Sometimes after I uncouple...

SYMPTOMS SOUNDS LIKE THE FACTORY SECURITY SYSTEM IS SHUTTING DOWN CHECK WITH DEALER ABOUT THE NEW FLASH FOR THE PCM... POWERTRAIN CONTROL MODULE.....MAIN COMPUTLER
7helpful
1answer

Where is the MAF sensor on a 2003 Dodge Caravan?

The MassAirFlow sensor on a Dodge Caravan is usually mounted in the air intake between the air filter and the throttle body, located on the intake manifold.
Sometimes mass air flow sensors are mounted directly to the throttle body.
Not finding what you are looking for?

212 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...