SOURCE: how to change gear shift cable on 2001 dodge dakota 2 wheel drive
the cable goes from the shifter to the transmittion arm,, both cable ends connect via a pin and cotter key (usually) the cable housing (black outside layer) is connected to the shifter frame usaually by a clip and is bolted to the transmittion with a couple bolts on the other end ,, i know this was pertty basic but hope it helped
Gday mate,geoff here, now on your shifter if column shift there is an adjustment where it goes down the box from the steering column under the hood and if stick shift should be just under the console, alternitiveley the rubber grommets on the linkage are worn and need replacement, some fuel hose will surfice here if the grommets are unavailable at the parts counter, hope this helped, geoff.
322 views
Usually answered in minutes!
×