2000 Toyota Land Cruiser Logo

Related Topics:

Sue Brunelli Posted on Dec 19, 2017

2000toyota land cruiser alarm going off after it was ran through a car wash any ideas what it could be and no warning lights coming on

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Nov 11, 2008

SOURCE: Warning light Toyota Land Cruiser 1996 not 2003

I had a similar problem and the knock sensor turned out to be the faulty.

Ad

Anonymous

  • 109 Answers
  • Posted on Mar 29, 2009

SOURCE: toyota land cruiser unknown warning light

Try calling these guys and see if they can help.
(818) 882-1238

Anonymous

  • 209 Answers
  • Posted on Apr 29, 2009

SOURCE: 2000 Land Cruiser Parking Brake alarm will not turn off.

check the parking brake switch if it is engaging and disengaging when you pull the the parking brake.

Anonymous

  • 507 Answers
  • Posted on Nov 28, 2009

SOURCE: 2004 toyota land cruiser airbag light is on

You may have upset the sensor on the chassis rail which has set off the light,it can take a while to set off ,the damage is minimal and the sensor is slow to crack internally or fail,you can try to disconnect the battery for 1 hour or so but no guarantees on that but even so it can work ,if the light comes back on you may need to see a dealer ,check at the front of the rails under hood for damage of any kind

whkiess

whkiess

  • 8 Answers
  • Posted on May 19, 2012

SOURCE: 91 Land Cruiser, starts fine, however all dash

I've had a similar issue. Turned out the Alternator was clogged with mud and wasn't charging anymore. Pulled it out and apart, cleaned it out and put it back and voila! Problem solved. Check the output of your Alternator, should be around 13.2-13.5V.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

What is an active trac light on my 2000 land cruiser?

All explained here

https://forum.ih8mud.com/threads/a-trac-101.537946/

I have a 2000 land cruiser and my abs, active trac, vsc trac ...

https://www.justanswer.com > toyota > aqanp-2000-lan...
Oct. 10, 2017 - I have a 2000 land cruiser and my abs, active trac, vsc trac, vsc off, and brake light all came on at once. I have - Answered by a verified Toyota ...

2000 Toyota Land Cruiser Dashboard Lights & Symbols Guide

https://www.toyota.com > owners > resources > 2000
2000Land Cruiser ... Below are some commonly found Toyota dashboard lights ... Electric Power Steering (EPS) Warning Light [1] ... TRAC OFF Indicator [1].
2helpful
2answers

Battery warning light stuck "on" - 2004 Land Cruiser

Check wiring grounds. Especially check the battery connections.
0helpful
1answer

Land cruiser 2010 timing belt warning light ON, how can reset?

not sure if thes will work for you but try it you wont lose any thing :

turn the key on hold the odometer button in and turn the key but don't start the engine and keep holding the button for 10 ten seconds then lift your finger off the button and the number 1 should come up now this number represents 10,000 K's so what you do is keep pushing the button until you reach the desired K's you want you can go up to 20 = 200,000 K's and then you hold the button in for another 10 seconds then let go and turn the key off and turn it back on and it should be gone i know this works because I've just done it today
0helpful
1answer

Toyota Land Cruiser fuel tank warning light on

Hi There. Have the exact same problem on my 95mod petrol with the sub fuel tank not emptying. think it may be the relay but cant find it. The earlier models have the relay in the rear wheel well, but ours are set up differently. had the whole car to pieces but still cant find it. Was wondering if you had any luck with yours and could enlighten me. Thanks [email protected]
0helpful
1answer

2000 Land Cruiser Parking Brake alarm will not turn off.

check the parking brake switch if it is engaging and disengaging when you pull the the parking brake.
0helpful
1answer

Toyota land cruiser unknown warning light

Try calling these guys and see if they can help.
(818) 882-1238
0helpful
1answer

Brake light on the dash is stuck on my 94 land cruiser ...why?

Hello!
From your description it sounds like the warning light switch has either come adrift or stuck? If you examine the hand brake area look around for possibly a White plastic plunger that should be exposed when the hand brake is lifted/applied. To confirm identification there will be two wires possibly in a clip on plug going to it.
If the plunger/switch is in situe then it may have stuck, try gently pushing the plunger in and out it is sprung loaded so resistance should be felt, if you touch it and it is sloppy the try getting behind it and pushing the body back into its slot. You may have to remove the sock/gaitor that covers the hand brake base.
If all fails then try removing carefully the wired plug to it and the light will be permanently off on the Dash.
There you Go!
FixYa'd
Paul 'W'
0helpful
1answer

Warning light Toyota Land Cruiser 1996 not 2003

I had a similar problem and the knock sensor turned out to be the faulty.
Not finding what you are looking for?

140 views

Ask a Question

Usually answered in minutes!

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...