Location of fuel filter in a Ford Focus 2006 - Ford Cars & Trucks

In the link

https://www.google.com/search?q=2012+Ford+focus+sel+fuel+filter+location

..

C109 here

https://www.focusfanatics.com/threads/knock-sensor-location.727586/

More here

https://www.google.com/search?q=Ford+focus+1.6+2006+fuel+knock+sensor+location

..

F2.30 - 10 amp . central junction box
F2.50 - 7.5 amp central junction box . Interior Fuse Box Location 2005 2007 Ford Focus 2006 Ford Focus ZX3 2 0L 4...

Any codes???Why a fuel pump where is fuel filter???Tune up???

It's a messy job, but here is the answer.
http://www.ehow.com/how_6606069_change-filter-2006-ford-focus.html


I know it's not as easy as they make it sound because most need a special fuel line disconnect tool to remove the lines from the filter ends.


Hope this helps.

clean the throttle body

Ford Focus 2000-05
Removal & Installation

Print

1. Before servicing the vehicle, refer to the Precautions Section.
   NOTE The fuel filter is located underneath the vehicle in the area of the rear suspension.
   
2. Relieve the fuel system pressure.
3. Raise the vehicle.
   NOTE To remove the lines, press the quick-release tabs on the connectors.
   
4. Remove or disconnect the following:
   
   Evaporative Emissions (EVAP) vapor line Fuel filter lines Fuel filter and bracket assembly Fuel filter
   
   

   Fig. Location of fuel filter and lines.
   
   

To install:

1. Install or connect the following:
   
   Fuel filter Fuel filter and bracket assembly Fuel filter lines EVAP vapor line
   
2. Start the engine and check for leaks.

1. Before servicing the vehicle, refer to the Precautions Section.
   NOTE The fuel filter is located underneath the vehicle in the area of the rear suspension.
   
2. Relieve the fuel system pressure.
3. Raise the vehicle.
   NOTE To remove the lines, press the quick-release tabs on the connectors.
   
4. Remove the fuel filter bolt and remove it from the bracket.
   
   

   Fig. Location of fuel filter and lines.
   

To install:

1. Position the fuel filter into the bracket. Ensure the fuel flow direction is properly aligned.
2. Install and tighten the fuel pump bracket bolt.
3. Lubricate the fuel tube fittings with clean engine oil. Align the fuel tube fittings and press together until a click is heard and then pull on the fittings to make sure they are fully engaged.
4. Start the engine and check for leaks

Hi, it's back by the fuel tank.

NOTE: The fuel filter is located underneath the vehicle in the area of the rear suspension.

1. Relieve the fuel system pressure by removing the fuel pump fuse from the battery junction box, starting the engine, and allowing the engine to idle until it stalls.
2. Raise the vehicle.
   NOTE To remove the lines, press the quick-release tabs on the connectors.
3. Remove or disconnect the following:
   
   Evaporative Emissions (EVAP) vapor line Fuel filter lines Fuel filter and bracket assembly Fuel filter
5. 
6. Fig. Location of fuel filter and lines.

To install:

1. Install or connect the following:
   
   Fuel filter Fuel filter and bracket assembly Fuel filter lines EVAP vapor line
   
2. Start the engine and check for leaks.

under the dash passenger side ,remove the glove box to gain access

folwo the fuel line from the tank to the front of the engine and it will be spliced into the line before you get to the front of the car. on my ford it is under the car almost directly uder the drivers seat.