Cars & Trucks Logo

Related Topics:

c
cocoa Posted on Nov 30, 2017
Be the first to answer

Crv 2017 won't start. dash says emergency brake system problem

Answer This Question

5 Related Answers

Anonymous

  • 651 Answers
  • Posted on Nov 28, 2008

SOURCE: 2001 Honda Crv Bake light on dash is on

make sure your emergency brake is off all the way.

Ad

Anonymous

  • 136 Answers
  • Posted on May 04, 2009

SOURCE: anti lock brake light on dash in 1995 gm yukon

sounds to me like the abs relay is bad maybe $75 repair at the dealer

Anonymous

  • 57 Answers
  • Posted on May 12, 2009

SOURCE: 2004 honda crv brake won't release

Your emergency brake is a mechanical brake system that is indipendant of the regular hydrolic system. If the red brake light on the dash is on make sure it's the emerg. brake and not a problem with the fluid level or the calapers sticking. the best way to check the emerg. brake is to rase both rear wheels off the ground and spin them. If they spin, the emerg. brake is not locked up. If they don't spin, take the rear tires off and the brake drums. (you may have rear disk brakes.) check the springs to insure they are all hooked up properly. If there is no problem there, follow the parking brake cable to check for damage. The cable is like a brake cable on a bike, If the inner cable is binding inside the cable sleeve,the brake wont release. If you have rear disc, it's probly a bad calaper.The park brake cable is attached to the calapers. Rember if it wont run it's annoying but if it won't stop, it's deadly. DON"T experiment with brakes!!! If in doubt, take it to a pro.

aaboy

Martin

  • 206 Answers
  • Posted on May 29, 2011

SOURCE: my 2003 are good

Sound like the back axle, maybe diff?
Change the rear diff oil and noise will cease. ( known issue)

Anonymous

  • 135 Answers
  • Posted on Aug 21, 2011

SOURCE: emergency brake won't release. light

check cables and calipers

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Chime Fuse for the emergency brake?
All questions need 'year make model', and please don't use 'text speak' abbreviations as it causes confusion to the more mature experts.

Generic Answer is 'No'! The reason is that functions like that are a function of the Body Control Module. If you disconnect that, nothing works. Fix the problem, don't try and find a way around it. In the old days, there were sounders, but now the BCM puts chimes though the vehicle audio system even if the radio is switched off!

Google

year make model emergency brake chime problem

https://www.google.com/search?q=%E2%80%8Byear+make+model+emergency+brake+chime+problem

Is there a way to turn off the parking brake chime in a 2017

 JustAnswer https://www.justanswer.com > Ford Repair
Jun 19, 2021 - Generally, you will release the parking brake before placing the transmission into gear which should prevent the noise.

1 answer · Top answer: I'm glad that I was able to answer your question today. My goal is to ensure you receive ...
Is there anyway I can turn off the chime for the electric
Sep 9, 2022
Parking brake is not on but when try to drive it makes
Mar 12, 2022
2017 Ford Edge parking brake light is on and the door chime
Aug 1, 2022
Parking brake fault and auto hold fault lights on. Parking
Nov 19, 2021
More results from www.justanswer.com

Chime and Parking Brake Light Comes On

 Ford-Trucks.com https://www.ford-trucks.com > forums > 1220889-chi...
Feb 1, 2013 - Ok, on my 06 250, my parking brake light comes on and with ding. ive checked the brake fluid, its maxed out, i have no lose of braking power ...

Emergency brake light/beeper won't stop-- driving me crazy!

 Riviera Performance https://rivperformance.editboard.com > ... > Interior
Jun 15, 2009 - Test: after checking the fluid level, try engaging the parking brake while rolling about 25 mph (you can disengage while moving). The brake ...

Emergency Brake Light and Ding

 Diesel Place https://www.dieselplace.com > threads > emergency-br...
My emergency brake light is on and a warning chime rings even while driving. The brakes are working as is the electric brake. Chime goes with or without...

..
Read full answer
Sep 22, 2023 • Cars & Trucks
0helpful
1answer

Crank, no start, lightning bolt is on
The lightning bolt on the dash means that there is a problem with the electronic throttle control system in your vehicle. ... The light may be on for a glitch and the electronic throttle control system needs to be reset.Jan 5, 2017
https://www.yourmechanic.com/question/red-lighting-bolt-on-and-car-won-t-start-but-i-have-electrical-power-by-kyle-m
Read full answer
Mar 10, 2019 • Cars & Trucks
1helpful
1answer

2012 crv Brake, Vehicle Stability Assist Syatem, and Electric Power Steering dash light have all come on at the same time - Are they related to one problem?
probably. The entire system relies on wheel speed sensors, steering wheel position sensor, yaw and lateral acceleration sensors. When one has a problem, it shuts down the entire system and turns on all the lights. It also sets a a trouble code. Get the trouble code read. That's your starting point.
Read full answer
Jan 07, 2018 • Cars & Trucks
0helpful
1answer

My Avital 7111L starts my car and dies immediately, Never did this before. However I did just put in a new battery.
same here my Auto starter Avital 7111L happened this morning never happen before , just replaced the battery and it happens press the remote start it start right up but shut down after 5-6 second and restart by it own like 3 times , i like the way the gentleman on top comment said you need to drive around at least 15 minutes for it to relearn the system again , my brother Honda CRV 2017 did the same thing after replaced the battery a lot of light show up on the dash but after driving around for 15-20 minutes it go back to normal again hope this help .
Read full answer
Nov 13, 2017 • Cars & Trucks
0helpful
1answer

VW golf mk4 press brake warning light not coming on
What brake are you talking about? The emergency brake or the brake pedal. Warning lights only come on when 1, there is a leak ing the system while driving and you loose pressure, 2. upon starting the vehicle as a bulb check, 3. When you apply the emergency brake. Have the brake switch on the pedal and emergency brake checked also check the bulb. If the bulb lit upon startup, it is probably the switch. Please give more details so that we can be better able to help you.
Read full answer
Dec 10, 2014 • Cars & Trucks
0helpful
1answer

For the Honda CRV 2004, the driver's side automatic window does not go up or down but all other ones do. Please advise.

Your emergency brake is a mechanical brake system that is indipendant of the regular hydrolic system. If the red brake light on the dash is on make sure it's the emerg. brake and not a problem with the fluid level or the calapers sticking. the best way to check the emerg. brake is to rase both rear wheels off the ground and spin them. If they spin, the emerg. brake is not locked up. If they don't spin, take the rear tires off and the brake drums. (you may have rear disk brakes.) check the springs to insure they are all hooked up properly. If there is no problem there, follow the parking brake cable to check for damage. The cable is like a brake cable on a bike, If the inner cable is binding inside the cable sleeve,the brake wont release. If you have rear disc, it's probly a bad calaper.The park brake cable is attached to the calapers. Rember if it wont run it's annoying but if it won't stop, it's deadly. DON"T experiment with brakes!!! If in doubt, take it to a pro.

Read full answer
Oct 12, 2012 • 2004 Honda CR-V
1helpful
1answer

1994 mercury grand marquis. My emergency brake light will not stay on when the brake is on. The bulb has be checked and it is still go. I need this for it to pass inspection
Hello, These controls are very simple. You need to have the switch adjusted in the holder under the dash or more slack in the adjustment cable.

The way this works is the contact switch needs to extended far enough to activate the bulb. If the Emergency brake is too tight, the contact switch does not get enough room to extend. There is adjustment in the holder for this. What usually happens is the contact switch has extended for a worn system.

When new Emergency brakes are installed or the brake cable is adjusted, someone should have reset the Emergency brake holder. Now the Emergency brake switch does not have room to work. The cable does not move far enough to allow the plunger to move under the dash. You need to either adjust the holder or loosen the cable.
Read full answer
Jun 18, 2011 • 1994 Mercury Grand Marquis
2helpful
2answers

My tailkights are not working at all. My Park in the car is stuck and won;t come down with motor started.
turn engine off. Turn key to OFF position, (no lights on dash lit). Step on brake, pull shift lever to neutral. start car, put in drive and go. this is emergency bypass.

When the key is ON, the shift lock soneoid is engaged and won't release till the brake is applied. Since you don't have brake lights, it means the solenoid won't unlock.
check for a blown fuse or a bad brake switch on the brake pedal.

OFF is the first click clockwise from LOCK. it goes, LOCK, OFF, ON, START.
Read full answer
Dec 16, 2010 • 1998 Ford Taurus
0helpful
1answer

2004 honda crv brake won't release
Your emergency brake is a mechanical brake system that is indipendant of the regular hydrolic system. If the red brake light on the dash is on make sure it's the emerg. brake and not a problem with the fluid level or the calapers sticking. the best way to check the emerg. brake is to rase both rear wheels off the ground and spin them. If they spin, the emerg. brake is not locked up. If they don't spin, take the rear tires off and the brake drums. (you may have rear disk brakes.) check the springs to insure they are all hooked up properly. If there is no problem there, follow the parking brake cable to check for damage. The cable is like a brake cable on a bike, If the inner cable is binding inside the cable sleeve,the brake wont release. If you have rear disc, it's probly a bad calaper.The park brake cable is attached to the calapers. Rember if it wont run it's annoying but if it won't stop, it's deadly. DON"T experiment with brakes!!! If in doubt, take it to a pro.
Read full answer
Apr 30, 2009 • 2004 Honda CR-V
0helpful
1answer

2001 Honda Crv Bake light on dash is on
make sure your emergency brake is off all the way.
Read full answer
Nov 28, 2008 • 2002 Honda CR-V
Not finding what you are looking for?

View Most Popular

Cars & Trucks

Related Question

Chime Fuse for the emergency brake?

  • Cars & Trucks

2,443 views

Ask a Question

Usually answered in minutes!

Popular Questions

What is the DRL warning light on the dashboard of

2007 Honda CR-V

Reset car alarm honda CRV

2003 Honda CR-V

Where is the knock sensor located on a 2003 honda crv engine

2003 Honda CR-V

2006 Honda crv, vsa, abs, and triangle light are

2006 Honda CR-V

1999 honda crv timing belt

1999 Honda CR-V

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
Manual. user-manual-2007 CR-V Manual

2007 Honda CR-V

PDF Manual
Http://www.honda.com.au/wps/wcm/connec...

2003 Honda CR-V

PDF Manual
Http://www.honda.com.au/wps/wcm/connec...

2007 Honda CR-V

Loading...