SOURCE: 2004 e500 mercedes trans problem code-2767 need
Hi,
The code P2767 definition is ,
Transmission input shaft speed sensor?turbine shaft (TSS)sensor B no signal..
Now in English it means the speed sensor is either faulty or bad connection,I would suspect the sensor, but worth getting checked by a transmission specialist,
Darren DCS
SOURCE: hello i have problem light mercedrs e class 2004
Check your bulb if never replaced, it is probably burned out.
SOURCE: how to change oil in 2004 mercedes e500 sedan
this is a bit of a loaded question while draining the oil and replacing the filter (up front, top right of engine) it requires 8.5 quarts Mobile 1 0-20 oil, to get a read on the level there is no dip stick, you have to after putting in 6 quarts, start your car, then turn it off, put your key in the accessory position scroll through your screen on the dash to find oil level, it will tell you to wait for about 15 minutes until obtains the proper level reading then it will tell you how much more oil to add.
and it will take another 15 to get verification of the proper level obtained.
1,062 views
Usually answered in minutes!
×