Repair your vehicle right away. Just click on the link I attach 2003 2008 Holden Isuzu Rodeo Ra TFR TFS Repair Service Manual Download
SOURCE: 2007 dodge caliber sxt front end making noise
problems with random check engine, gas, or abs lights going off loud noise sounds like grinding ...its your alternator..hard part to find a brand new one is $400.
SOURCE: torque settings for a holden rodeo 3.5 ra. Head
stage 1 = 29Nm(21 lb ft/3.0 kg-m)
final = 64Nm(47 lb ft/6.5kg-m)
do not reuse head bolts or apply any lubricant to the bolts. Do up bolts in following order for each head.
6 1 3 7
front
5 2 4 8
SOURCE: ford transit diesel, clanking noise from gearbox,
an auto transit ,in europe thats sacrilage ,the best white van mans van around reduced to be being a granny wagon,have you no pride in its heritage ??? the fastest getaway bank hold up van in the business in 60s reduced to being tied up in a autobox ,tell me what engine you have and i have a manual gearbox shipped forewith ,The shame of it a macho mans white van turned into a granny wagon -----
SOURCE: how do you program new
if its the ignition key it must be done by a dealer and have a lage black plastic head which has got a transponder in it. If you got a blank key cut at the locksmith it will turn the locks but wont start the car. Usually you get the dealer to do both supply ignition key and then get it cut, then they can program it. Make sure that all the doors are closed and unlocked and wait for dome light to go out before starting. Insert the ignition key into the ignition switch Open drivers door 3 on/lock Close/open drivers door Wait 8 secs On/lock/on (MY06-07) OR 2 on/lock OR on/lock (MY08) Close drivers door Hazards flash Press remote & keep pressing one button & then the other slowly(2 secs) until locks start working(they wont operate if key is in ignition). Hazards flash
but if your asking how to program the keyless entry remote follow this procedure.
take note step 5 is different for different year models.
238 views
Usually answered in minutes!
×