Hi, I have Toyota prius 2004 that has this problem: steering wheel click and vibration at higher speed

SOURCE: Toyota Previa GS 2000 - vibration through the steering wheel at high speeds

Did you have to remove front drive shaft to replace stabilzer link bars?

Anand Kumar

• 2035 Answers
• Posted on Aug 28, 2008

SOURCE: 2005 chevy malibu maxx shakes at higher speeds

This could the problem with misaligned wheel ,please get the wheel alignment done and check for any extra wear the type on the any one side which cause this problem....


Good luck...

SOURCE: Steering wheel vibration on 2004 toyota corolla

does it vibrate durreing brak aplicatin, if so probably a out of round rotor,ifatlower speeds just driveing
most ikely a seperated tire

SOURCE: car vibrates at slow speed, veering to the

check tyres for wear-wheel balance needed if visibly ok-have a wheel alignment after a tyre rotation-best even tyres to be put on fronts-they will carry out a safety check all suspension and steering before doing the wheel alignment

SOURCE: 2003 Toyota Corolla Wheel Alignment

The specs are what the manufacturer recommends for the vehicle when it leaves the factory. However that means with the original tires and condition. The caster is not adjustable on a Corolla, so if the vehicle pulls even with the tires switched, there is a possibility there is damage to the strut or steering parts. However, before changing anything, check all tire pressures and make sure the brakes are in good condition. A brake that is not releasing properly will cause a pull to that side. Individual toe is rather meaningless - the total toe is what is measured. You have no king pins on a Toyota so you will not have KPI.