New parts: battery, starter, solenoid, neutral position sensor & ignition switch. No broken wires. Tried numerous tricks to reset alarm. Tested electrical. Result no power to the soleniod. Last option is alarm. How do disarm and keep it disarmed
Could be messy since disabling the alarm may disable your ignition circuits so you have to be really careful about this procedure. Sometimes they have kits to bypass the system and they guarantee that it will work - might want to look into that alternative.
SOURCE: 1994 cadillace anti theft system
I just had this same problem with a '96 . do you have a vats key in your '94? you need to bypass the VATS system. read some of the blogs on this site and it will tell you how to do it. I fixed mine with a $2 resistor from radio shack.
SOURCE: 2001 Explorer; anti theft light steady; no power to car
take the positive side of the battery off for about 3 seconds and then put it back on to see if this will reset the security code
SOURCE: 1995 Nissan Maxima alarm system
Hey, I bought my 1995 Nissan Maxima GLE brand new back in July 1994 with factory installed alarm, it just doen't make any sound when you arm or disarm it with remote. The only way you can tell whether it is armed or disarmed is from the lever position of your doors and the blinking red light under the dash. Only the newer versions of Nissan/Infiniti's has the "Audio/Silent" mode button on the remote which allows you to activate/deactivate you car alarm with an audiable sound or no sound at all. No worry, there is nothing wrong with your remote or car alarm.
888 views
Usually answered in minutes!
×