Hi
If you go on the net and google the code theres loads of info on the Lexus forums about that particular error code it sounds like an easy fix
Hope this helps Nick
SOURCE: 1999 lexus es300
This has been happening to my car as well. It typically happens when your oxygen sensors start to wear out. Mine does it once in a while and I have the local auto store reset it. Go to your nearest auto store and have them tell you what code it is and ask them to reset the OBD so the light goes out. If the light comes on right away and the code has to do with your oxygen sensors, have them replaced. There are three, two are easy to replace, one takes some effort as it is in a tough to get to spot. The dealer will charge you a fortune to replace them so do it yourself or through a local mechanic. It is a very simple task other then the access.
SOURCE: amplifier location 1993 lexus es300
My Son has a 95 es300, the amp for it is located under the front passenger seat. The easiest way to access it is to remove the 4 bolts holding the seat down, and remove the seat. Takes about 5 minutes
SOURCE: How do I change AC blower motor on 1997 Lexus ES300?
THE BLOWER UNIT IS LOCATED IN PASSENGER COMPARTMENT ABOVE THE RIGHT FRONT FOOT WELL.YOU HAVE TO REMOVE THE GLOVE COMPARTMENT LINER.THE GLOVE COMPARTMENT DOOR AND THE AND THE RIGHT LOWER DASH PANEL.THEN YOU CAN REMOVE BLOWER MOTOR SCREWS AND BLOWER MOTOR.
Testimonial: "good instructions!"
SOURCE: Lexus ES300 outside temperature gauge not working
I also have the same problem, I would also be happy with a diagram of the location of the sensor.
1,156 views
Usually answered in minutes!
×