Refer to the link for information and possible causes of this BARO sensor fault code. P2227 OBD II Trouble Code Barometric Pressure Circuit Range Performance...
Code p 2227 refers to Barometric pressure sensor(BARO)---range /performance problem===causes ---wiring---BARO sensor---ECM
to remove the fault , replace the sensor then use a scan tool to reset the ECM
SOURCE: how to program the volvo V 70 XC 2008 garage door opener
Simply hold down the button you want to use (there are 3 for up to 3 different garage doors) until the light flashes and keep holding it down. Now place the garage door opener up near the sun visor and hold it's button down until the light on the on button you are programming flashes. It is now programed. The other 2 are done the same way. Good luck. It took me a while to find the info, it's not in any Volvo manuals I could find.
Mike
SOURCE: 2000 volvo v70 xc Getting
if it is available the sensor can be replaced if not you will need a transmission
SOURCE: Anti skid light just came on my Volvo XC-90, what
You may have accidentally switched off the STC. Your car battery voltage may bee too low (this should remedy itself after a while driving). There may be damage to the breaks.
Best thing to do is to take it to the Volvo-service and let the guys check the system with their diagnostic software.
SOURCE: how to change cd player in my volvo xc 90 2004
If you dont want to use volvo original you probaly need an aux box, google it.
SOURCE: my blower on my 1998 volvo v70 xc is not blowing
The most common problem is either the blower motor or the speed control resistor. Both items can be accessed by removing the glove box and panel below it.
1,813 views
Usually answered in minutes!
×