Question about Cars & Trucks
First buy the spark plugs open the bonnet a tubular spanner is used to take out the plug remove the wire on the plug take out the plug replace connect the wire do this one at a time or you may forget which wire comes for which plug
Posted on Aug 10, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Search for the engine model ECOTec 2.2 rather then Malibu. It is very easy to replace the plugs, they are DEEP inside the engine so you will need a 6" socket extension for the spark plug socket. Needle nose pliers were required to retrieve the socket on the first plug. Don't push down hard on the plug, just enough to engage the nut. Full screen photo sequence is available at:
Posted on Aug 09, 2009
Allow the engine to cool before removing the spark plugs. Attempting to remove spark plugs from a hot engine can cause the spark plugs to seize. This can damage the cylinder head threads. Clean the spark plug recess area before removing the spark plug. Failure to do so can result in engine damage due to dirt or foreign material entering the cylinder head, or in contamination of the cylinder head threads. Contaminated threads may prevent proper seating of the new spark plug. Use only the spark plugs specified for use in the vehicle. Do not install spark plugs that are either hotter or colder than those specified for the vehicle. Installing spark plugs of another type can severely damage the engine.
WARNING Do not coat spark plug threads with anti-seize compound. If anti-seize compound is used and spark plugs are over-torqued, damage to the cylinder head threads may result.
Posted on Oct 07, 2009
Testimonial: "Thanks for the help, it was easy to change out the plugs with your info."
on 2.4 engines, remove the 4 bolts on the ignition coil cover, on top of engine.pull straight up to release boots from sparkplugs. all 4 cylinders are about the same..
Posted on Oct 30, 2009
on the 3.1, it is easier to change back plugs if you remove the coil packs. so you can reach the plugs from the top of engine. it almost seems impossible but this will work. it will give more room to work.
Posted on Jun 16, 2010
SOURCE: What should the spark plug
The spark plug gap for this application is 0.60 Although, the spark plugs are Iridium plugs and are pre set by the manufacuter and should not be tampered with due to damaging the diode on the plug. The correct application for this vehicle should be AC DELC0 IRRIDIUM SPARK PLUGS.
Posted on Jan 06, 2011
Tips for a great answer:
Jul 04, 2014 | 2004 Chevrolet Malibu
Sep 19, 2013 | 2004 Chevrolet Chevrolet Malibu MAXX LS
Nov 14, 2012 | Cars & Trucks
Nov 13, 2012 | Cars & Trucks
Nov 08, 2012 | 2004 Chevrolet Malibu
Jan 04, 2011 | 2004 Chevrolet Malibu
Oct 07, 2009 | 2004 Chevrolet Malibu
Jul 17, 2009 | 2004 Chevrolet Malibu
62 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: