Https://s2.postimg.org/einm75w6x/power_windows.jpg
Click on the link.
Check the wire harness on hinge side of driver door. Probably has a protective rubber boot, see if you can pull boot back far enough to get at yellow wire, key on, use a test lite and probe yellow wire, see if there is voltage.
At the lower part of diagram, see black wire, terminal G, that is ground, find that in wire harness and check it. You can use a test lite connected to battery voltage, probe the black wire, if the lite comes on, at least the ground is good enough to turn on the test lite. Because you open and close the driver door so much, sometimes those wires break.
When probing any wires, cover the hole with fingernail polish or something, when your done.
310 views
Usually answered in minutes!
×