Citreon Service interval passed now Engine Man. Light is on

Saxo 1.1 dessire anyone no clearances on tappets mine are 0.2 front 0.4 back and won't start

1. alternator belt loose or broken
2. alternator contact brushes are worned-out
3. voltage electronic regulator spoiled
4. rectifier malfunction or not function

Try this procedure and let me know if it does not work.

1. Ignition key in the "Off" or "0" position.

2. Press and hold the odometer button and turn the ignition key to the "Accessory" or "1" position.

3. Keep the odometer button pressed in until you see the following words in the display, "oil service", or "inspection" with "reset" or "re".

4. Press and hold down the odometer button again until "reset" or "re" flash.

5. While the display is flashing, press the odometer button again briefly but do not hold it down this time to reset the service interval indicator. After the display has shown a new service interval then "END SIA" should appear in the display for two seconds.

If the procedure fails the first time then repeat the procedure and it should clear the service interval indicator.

1. Switch ignition OFF.
2. Press and hold button "A" - fig. 1 or fig. 2.
3. Turn ignition key to position "I".
4. After 5 seconds the words "OIL SERVICE" or "INSPECTION" are shown together with the message "reset" or "re".
5. Release button "A". Press and hold button "A". After a futher 5 seconds the message "reset" starts to flash.
6. Release button "A". Press and release button "A" again.
7. The new service interval is now displayed.
8. Press and release button "A". The message "END SIA" is now displayed.
8. Switch ignition OFF.

Fig. 1




Fig. 2




Please rate my response. Thanks!

turn key on with engine off.
press menu button until service interval is shown
then scroll using the step button until preform service is displayed
then hit yes.

If you mean the service light here is the procedure.
Button #1 mileage reset button
Button #2 Clock adjustment button

• Switch ignition off
• Press and hold button #1 at bottom left of speedometer
• Switch ignition on and release button
• The text "service Oil or service INSP" will appear in the display window. On 2000 m, y, cars the message "SERVICE NOW" will appear in the instrument cluster with center display
• Turn button # 2 at lower side of tachometer to the right
• The service display shown in the display window is now reset and "service _ _ _" will appear in the display window
• Switch ignition off, service display is now set until next scheduled service interval is reached.
  

Fixed service intervals
Press and hold button [A] 24297. Switch ignition ON. Release button [A]. The words "SERVICE" or "SERVICE IN xxxx MI" will appear in the trip recorder display. Press button [B] until the display clears and is replaced with the new service interval or "SERVICE!". Switch ignition OFF.
button A middle right of check
button B right of button A

1. Key in 0 or off position.

2. Press and hold odometer button and turn key to 1 or acc. position.

3. Keep button pressed until any of the following words appear in display: "oil service" or "inspection", with "reset" or "re". For vehicles with "high cluster", the fuel amount remaining until next service is displayed.

4. Press and hold button again until "reset" or "re" flash. If there is no "flash", minimum consumption value has not been met.

5. While display is flashing, press button briefly to reset service interval indicator. After display has shown new interval, the following will appear in display for approx. 2 seconds:"END SIA"

Ignition key must be “off”
• Press and hold the trip odometer reset button in the instrument cluster (left button), and turn the ignition key to the first position.
• Keep the button pressed for approximately 5 seconds until one of the following words appear in the display: “ OIL SERVICE, or “INSPECTION”, with “RESET”.
The service due is shown with “reset” if the coded minimum consumption limit has been reached and resetting is possible. If “reset” is not shown, the minimum limit has not been reached and resetting is not possible.
• Press and hold the reset button again until the word “RESET” begins to flash.
• While the display is flashing, press the left button briefly to reset the service interval. After the display has shown the new interval the following will appear:

1. Key in 0 or off position.

2. Press and hold odometer button and turn key to 1 or acc. position... like you're turning the car on, but don't crank the engine.

3. Keep button pressed until any of the following words appear in display: "oil service" or "inspection", with "reset" or "re". For vehicles with "high cluster", the fuel amount (in litres) remaining until next service is displayed (i.e. 3224).

4. Press and hold button again until "reset" or "re" flash.

5. While display is flashing, press button briefly to reset service interval indicator. After display has shown new interval, the following will appear in display for approx. 2 seconds:"END SIA"