Also bought new keys thinking it could be the chip. The security light will flash and not turn off while reprogramming PK3. I really am out of suggestions of what to do next.
SOURCE: 1994 cutlass supreme--security light on--car won't start
take to dealer and have them reprogram the computer
SOURCE: 95 F150 wont crank
the starter should be replaced. The solenoid is kikcing the pinion out but there is no contact being made to turn the starter motor. I have the exact same truck and before i changed the starter used the old starter tap trick. Tap the starter casing with a hammer and it should start turning again. hope this was helpful for you. Good luck.
SOURCE: 93 Bonneville,security light flashing,will not
i have been having problems with my 2001 pontiac grand am se 2.4 it has been jerking n skipping i put it on a comp at advanced auto parts i got this reading map\boro\circut high output and torque converter circut stuck on i need to know what the problems r and how to fix them i think the first one is a map sensor but i dont know about the torque converter circut can someobne help me i am gonna try n save some money and fix it myself if i can find out what these r and how to go about fixingt them
SOURCE: 93 bonneville security light flashing
your key reader is not reading the chip in your key you can either replace the ignition switch cost about 250 dollars parts and labor or i can tell you how to bypass it for less than 20 bucks in premium chat hope this helps
thanks wes
SOURCE: starter wont crank on a 2000 oldsmobile intrigue
Check your manual if you have it. I believe you need to have the key in the ignition in the ON position for about 10 minutes to reset the security system.
41 views
Usually answered in minutes!
×