SOURCE: 2008 ford focus
You need 4,6 qts of 5W-20 motor oil. If I were you I'd start right now to use synthetic oil. If you decide to do it - go with "The First in Synthetics" and the best: Amsoil! 5W-20 XL motor oil gives you (guaranteed) protection for 7.500 miles. (Do not fall for warranty cancellations or similar dealership spam. Magnuson-Moss act prohibts cancellations based on brand). Read this: http://people.msoe.edu/~yoderw/oilfilterstudy/oilfilterstudy.html or this: http://www.lesabret.com/filters/filter.html and try to avoid Fram filters. It seems that any other filter is better than Fram. I'd recommend Amsoil, Wix, Carquest (made by Wix), Mobil...
SOURCE: cant get the oil filter housing off
Jetta GLI figuring it's a VR6 use a 6 mm allen socket to remove the drain plug to empty the oil and reinstall it. The use a 36 mm socket to remove the oil filter housing, replace the seal and torque it to 25nm.
SOURCE: Need to remove oil filter housing - oil leaking
This is not an easy repair in your driveway, but can be done. 1st thing, have you checked to see if the oil filter is the issue or is it the drain plug? If its the oil filter housing gasket, you will need to remove the filter. The housing is held in place by the threaded bolt assy that the filter screws onto. You will need to remove that bolt, remove the coolant hoses. Clean the engine block surfaces, for the new gasket to mate to, clean the cooling housing surfaces, install the bolt through the housing, and install the gasket onto it. Then install the bolt/housing into the block and tighten the bolt. Install the coolant hoses, oil filter. Fill the cooling system with the coolant that you removed. Fill the engine with oil, start and check for leaks.
SOURCE: location of a oil filter on a ford focus
As this is a transverse engine the oil filter is on the back side of the engine
125 views
Usually answered in minutes!
×