2005 Saturn VUE Logo

Related Topics:

Bill Meiborg Posted on Jun 24, 2017

I need nthe torque specs for the transmission and flywheel on a 2005 vue

Im replacing the tranmission

4 Related Answers

Anonymous

  • 1 Answer
  • Posted on Dec 28, 2008

SOURCE: 2005 SATURN VUE ABS, AWD, R/FRONT BEARING REPLACEMENT

just did one today. removed housing from car, and used a press . be careful of aluminum housing. also used penatrating spray. clean oxidation from inside bearing hole,then lubricating, helped in installation

Ad

Anonymous

  • 3 Answers
  • Posted on Apr 14, 2009

SOURCE: 2003 saturn vue transmission service procedure?

You have to take it to a garage or dealership. Transmission has no dipstick. It has a special plug that bolts on where dipstick should be located.

mkv0525

Mike Vincent

  • 358 Answers
  • Posted on May 28, 2009

SOURCE: What is the torque spec for 2005 Saturn Vue V6 engine?

119096656I will send yhese in 3 trips. text to large

airjer995

Jeremy W.

  • 5332 Answers
  • Posted on Aug 07, 2012

SOURCE: Remove a flywheel

The clutch come out with the engine since it is bolted to the fly wheel. If you had an automatic transmission then you would need to remove the torque converter bolts from the flywheel so that the torque converter would stay in the transmission. If you pulled the manual transmission the clutch would stay attached to the flywheel. It's the same when pulling the engine.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Flywheel replacing

you will need a replica flywheel and new bolts plus torque range and manfacturers specs.
0helpful
1answer

Torque specs for 2003 saturn veu 3.0

2003 Vue Torque Specs? - SaturnFans.com Forums

www.saturnfans.com > ... > Models > Saturn Vue > Vue Tech

Feb 4, 2009 - 6 posts - ‎5 authors
Does anyone have/know where I can get the torque specs for a Saturn Vue? ... See attached for 2003 2.2 and 3.0 engine torque and front ... need vue torque specs
9 posts
Oct 13, 2010
Filter cap and drain plug torque spec
14 posts
Feb 19, 2009
Lug Nut Torque?
5 posts
Oct 6, 2008
S-Series Torque Specifications
15 posts
Nov 13, 2004
More results from www.saturnfans.com
0helpful
1answer

Remove a flywheel

The clutch come out with the engine since it is bolted to the fly wheel. If you had an automatic transmission then you would need to remove the torque converter bolts from the flywheel so that the torque converter would stay in the transmission. If you pulled the manual transmission the clutch would stay attached to the flywheel. It's the same when pulling the engine.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

0helpful
2answers

Torque settings for 2005 lancer es fly wheel gearbox etc

2.0L Evolution engine

flywheel bolts 132 =/- 5 N.m. 98 +/- 3 ft lbs.

transmission to engine bolts 48 +/- 6 N.m. 36 +/- 4 ft lbs.

2.0L Non- Evolution engine

flywheel bolts 98 +/-5 N.m. 72 +/- 3 ft lbs.

transmission to engine bolts 48 +/- 6 N.m. 36 +/- 4 ft lbs.

2.4L Ralliart engine

flywheel bolts 132 +/- 5 N.m. 98 +/- 3 ft lbs.

transmission to engine bolts 48 +/- 6 N.m. 36 +/- 4 ft lbs.
0helpful
1answer

How do you change the flywheel?

Pull the transmission back (or remove) enough to access the flywheel/ torque converter. Remove the converter from the flywheel, then you will see the flywheel bolts that mount the flywheel to the crankshaft--(I think there are 6). It is advisable to replace these bolts with new ones when reinstalling the flywheel, and be sure to get the proper torque spec for the bolts from autozone or a reputable shop and torque them sequencially correct and to the proper spec.
0helpful
1answer

How to change tranmission fuel in a 2003 saturn vue

The transmission does not use fuel, but rather fluid. A lube shop is the best option for this, as they can flush cooler, and torque converter. You cannot flush those items at home...
1helpful
1answer

Torque converter locks up and wont release until it cools off

U may need to replace the torque converter and the torque converter clutch control solenoid inside the transmission it is mounter to the valve body, there is one thing you can try 1st, change the fluid in the transmission and the TCC (Torque Converter Clutch) solenoid, use the new GM spec DEXRON VI transmission fluid, there is a good chance you can fix this by doing these cheaper service and part replacement, if that doesn't work the tranmission must be removed and the torque replaced
0helpful
2answers

Add atf fluid

get a transmission funnel. it is wide and has a flexible tube. remove your dipstick. unless you have just replaced the filter or transmission add fluid by the pint to a transmission. get the fluid with the car running and in park. you will need to add some. wait for it to settle,. start the car and repaet till full.
0helpful
1answer

2005 SATURN VUE ABS, AWD, R/FRONT BEARING REPLACEMENT

just did one today. removed housing from car, and used a press . be careful of aluminum housing. also used penatrating spray. clean oxidation from inside bearing hole,then lubricating, helped in installation
Not finding what you are looking for?

315 views

Ask a Question

Usually answered in minutes!

Top Saturn Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...