2007 jeep compass sub frame is rotted out. Is this a covered part?

SOURCE: remove 2007 jeep compass bumper cover

Hello, I can assist you. Begin by rounding up the necessary tools:

7mm socket and ratchet
7mm wrench
10mm socket
screw driver or panel removal tool (for push rivets)
Now go to the following site and take a look at the step by step instructions and pictures which does a nice job of explaining this entire job. Thanks for using Fixya!
http://www.jeeppatriot.com/forum/showthread.php?t=6291

SOURCE: 2007 jeep compass. compass will start, but will

yake the cover from the stik off,at passanger sideu will see a white paastic that is conected tu a valve ,falow that mecanis and you will get it to a cable that goes all the way up to your egnition ,from the egnision to tha little plasti you will find that the cable is lose or off the track

SOURCE: 2007 jeep compass low beam doesnt work

Check the fuse for that side yes you have a fuse for each high and low beams for each side

SOURCE: Whats a good estimate on fixing a rotted rear sub

There is none

No way to know where in the
world you are or the currency

Repair What Exactly?

You surely know, you have to have it looked
over by at least 3 shops, that do that sort of work