Code 24 and 22 showed up on 1994 dodge shadow, base, 2.5 engine, automatic trans. both shows up at same time.

The 1994 Shadow came with a standard 3 speed automatic (A413), and with an optional 4 speed automatic (A604). If your shadow has the 3 speed, it has only one - the output sensor (VSS). Only if you have the 4 speed it does have both the output sensor and input sensor. The input sensor is about six inches to the left of the output sensor at the same level on the transmission.

Please follow the links provided for information on these OBD1 fault codes.
Chrysler ECU Computer Code 22 Coolant temperature sensor out of range


Chrysler Fault Code 24 Throttle Position Sensor TPS signal out of range

ignition switch check it.

All four codes involve the transmission.
Code 218 was for high trans fluid temp.
Code 700 was for a problem with the trans control circuits.
Code 740 involved the torque converter.
And code 1775 may have been for the malfunction indicator lamp.
Sounds like the transmission overheated for some reason, which could have cooked the fluid.

It is on a tag on the outside of the transmission case, you will need to raise the car to see the tag.

Go to AutoZone have them put it on there computer and clear the code....its FREE

crank has 2 marks, pull #1 spark plug out and make sure the piston is at the top,#1 cam lobes are at 10 and 2,dist at #1 plug wire. good luck, been their.

code po700 is to tell the ecm and you there is a trans.problem and dtc set in trans.module. po755 is a trans. shift solenoid problem. check trans.fluid level when hot and color of fluid ,dark is not good,burnt smell not good .chrysler has a large trans.problem need to visit a trans. shop for repairs.hope this helps.

what code did the mechanic say it had on it was it a shift solenoid or torque convertor lockup solenoid.

its aproblem with canister purge solenoid circuit in evap. system.