SOURCE: how much for suspensions on 95 sunfire
Sounds like your strut is loos at the tower, or you need a new strut. If you want to give it a shot, you can pull the plastic away from the little "strut hump" in the trunk, and tighten the bolts. In the front, you should be able to see the towers on each side. It should be 3-4 bolts in a triangle, with a large bolt in the middle on each side above the fender. You will probably need an adjustable wrench, and allen wrench, and some sockets.
SOURCE: 2000 Explorer Clunks, sounds "loose" suspension
it sounds like the radis arm bushing are wore out they are the arms that go between the frt. axle to the frame they have round bushings that are bolted the the frame rails just behind the frt tires.
SOURCE: clunking/rattling noise in the front end (2000 chrysler 300m)
you need to get the front end checked. it sounds like a suspension problem possibly your struts or sway bar but it could be a more serious problem. hope this helps
SOURCE: clunking noise when i go over bumps
have it put on a lift and the shocks and struts checked, they may be loose or defective.
SOURCE: clunk noise - right front wheel while going over
It could be the sway bar bushing, sway bar end link bushings, or the strut mount bushing worn and needs to be replaced. Check with your local dealership to see if it's still under warranty or any recall issues with this problem. If your past the warrant, Auto Zone will have the parts and can give your the step by step instructions to have the bushing replaced with common tools. Good luck and hope this helps.
93 views
Usually answered in minutes!
I’m paid $185 per hour to complete the task using an Apple laptop. I absolutely didn’t think it was conceivable, but my dependable buddy convinced me to give this straightforward an03 chance a go after she made $26,547 in just 4 weeks working on it. Visit the following page to find out additional
instructions———>>>http://Www.Smartcareer1.com
×