07 Chrysler 200 low beam headlights won't come but high beams and fog lights work just fine. Please Help!

Question edited to add maker.
Question moved to model category.

Here is one idea and some videos.

https://www.justanswer.com/acura/6uky3-acura-mdx-low-beam-headlights-will-not-on.html

Question edited for a lot of clarity and into normal written English.
Question moved to model category.

Test your Low Beam Relays

https://www.startmycar.com/ca/ford/territory/info/fusebox/2014

..

find the low beam light relays
by law the fog lights can only come on with low beam
using fog lights on high beam is *******

check for loose wires at the plug, end for corrosion on the plug terminals

the light is out replace it the low side work when u have high beams on ththe short in the light is in the low beam .

Try changing the headlights....some headlight high beams will work even when the low beams dont

high low switch is gone or both low beams bad

You headlight lamp have a diffuser mechanism which allows it to flip between the hight beam and low beam feature of the bulb. In fact, you high beam will function even if the low beam is not working.

I would recommend the purchase of the new headlight lamp. It would cost you you any where from $15.00 per unit to get a replacement lamp

First place to start is with headlight switch. I did have a case many years ago when both high beams were blown out at once, but this is rare. When you have the headlight switch out, jump power from te low beams to the high beam contacts. If high beams come on, replace switch.
Bill