My casting # V08060MJ what motor is this? think it a small block chevy

Small Block Chevy Engine Block casting and code identification

George, This is weird you say small block but suffix code TPJ comes back 454 cu.in. 230 HP Chev big block.
. TPJ 1992 Truck L-19 TBI VIN N Check the attached links, Good luck.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Decoding Big block Chevy engine suffix codes and stamped numbers YZ
http://www.1968ss.com/BBCsuffix.asp
Reference Chevy Engine Block Casting Numbers Chevy ********
Chevy V8 Casting Number Locations Part 1

327 = 1969 Camero 2 bolt 210 hp.

Chevy Casting Number identification - Block casting numbers

outintheshop.com/faq/casting/castings2.htm
Chevy Block Casting Numbers. Use these casting numbers to identify the block you have. ... 283. car & Truck 2-bolt. 3790721. 64-67. 327. 2-bolt Chevy II Nova Recessed filter. 3791362. 66-67. 327 ...... Vortec Truck L-35. 12554290. 350. 94-96.

Small Block Chevy Engine Block casting and code identification
http://www.73-87.com/chevy_ids/blockid.htm
Chevy Small Block Engine Casting Codes

The casting number for a small block chevy is located on the rear left side if the engine where the transmission bell housing would bolt to. Where did you find these numbers?

it is very very likely that a chevy with have a chevy motor. the easiest way to tell is by looking at your motor then google picture of the same truck if that is the same motor then its stock and an original chevy. you can also check the exhaust mainifolds every maker is unique. and the actual block casting will tell you everything that you need to know. my thought is if u have 6 exhaust ports than you have a 2.8. or if you have 4 i think its a 2.5

The 1985 Impala came standard with the Chevrolet 305 V8. All Chevrolet small block V8's from 265 cubic inches to 400 cubic inches from 1957 to about 1989 used the same block with almost no difference in the castings, so the motor mounts should fit from one block to the next. If you are trying to swap in a 350 newer than 1989, then the motor mounts are different, and you will have to have them fabricated by a local welder, machine shop, or perhaps the best, a local short-track race car driver/builder. Those guys can build anything.

stamp= f 0412dbuilt in flint (mi)plant 0n april 12 an the casting number 3789935 from a chevy ll built in 1960-1961 its a 283 low horse power 170 high horsepower 220 and its a 2 bolt main have fun with it