Question about Cars & Trucks

2 Answers

Inline 6 cyl chev need to find out what size engine is its in a 1965 chev 2 numbers I found are 3994257under that gm under that80 then I found00n2 then8191 then257j57 can you help identify?

Posted by on


2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has achieved Level 3.

  • Cars & Trucks Master
  • 471 Answers

Third member of the Chevrolet inline 6 family was introduced in 1962 to 1988.The new engine was lighter and had a different bell housing bolt pattern. Both auto & manual bell housings & starter motors became interchangeable with Chevy small block and big block V8s.
Other changes on the 3rd generation engine was the crankshafts now had 7 main bearings not 4 like the earlier straight six, Chevrolet decreased the stroke from 3.9375? to 3.25 to produce a 230 ci engine. A new wedge type combustion chamber like the V8 was also used. The valve train was changed from a shaft type & an increase from 1.5 to 1 ratio was increased to 1.75 to 1 like the big block chevys used, Chevrolet passenger cars used the new style engine until 1977, In the Camaro,Chevy Nova & full size trucks it was used until 1979. These vehicals previously used the Stovebolt sixes. In the mid-1970s, the V6 engine like the Buick V6 231& later the 200 ci & in the 1980 the 229 3.8 V6 Chevy to over from the inline six in passenger car. GM continued to use the inline 6 in trucks and vans until 1988. Brazil used the straight six in the Chevrolet Opala from 1969 to 1992 . The inline Chevy six were converted for marine use by Volvo Penta & mercrusier & were also used to run power generation & used in forklifts.
In 1970 GM made the inline 6 the base engine with the Chevy II/Nova with either a 230 or 250 ci engine, Applications:
1962-1969 Chevy II
1967-1971 Postal Jeep
1968-1992 Chevrolet Opala (Brazil)
194 Chevy straight six
194 was used in both Chevrolet and GMC trucks.
1962-1967 Chevy II
1964-1967 Chevrolet Chevelle
1965-1966 Studebaker Commander, Daytona 1966 only, Cruiser and Wagonaire
230 Chevy straight 6
The 230 Replaced 235 cubic inches (3.9 L). It was also used by Chevrolet and GMC trucks, primarily the half-tons. It produced 140 hp (100 kW). The 230 had a firing order of 1-5-3-6-2-4 rotating clockwise. This engine was used on the following vehicles:
1964 Chevrolet Chevelle
1965-1968 Checker Marathon
1965 Chevrolet El Camino
1966-1970 Chevrolet Nova
1966 Studebaker Commander, Wagonaire, Daytona and Cruiser
1967 Chevrolet Chevelle
1967 Chevrolet Camaro
1968 Chevrolet Chevelle Malibu
1969 Chevrolet Camaro
1969 Chevrolet Chevelle
3.8 Pontiac L6
The Pontiac 3.8 was a special SOHC version of the standard 230-cubic-inch (3.8 L) I6. An optional W53 version on the Firebird produced 215 hp (160 kW).
This engine was used on the following vehicles:
1967 Pontiac Firebird
1967 Pontiac Tempest Sprint coupe
250 Chevy inline six
The stroked 250 version produced 155 hp (116 kW) for Chevrolet and GMC. Between 1975 - 1984, an integrated cylinder head was produced, with one-barrel intakes for passenger cars, and two-barrel intakes for trucks after 1978.
Passenger car use of the 250-cubic-inch (4.1 L) engine was discontinued after the 1979
This engine was used on the following vehicles:
1966-1984 Chevrolet (passenger cars to 1979, trucks/vans to 1984)
1968-1976 Pontiac Firebird
1968-1970 Pontiac Tempest
1968-1976 Pontiac LeMans
1968-1969 Buick Special
1968-1972 Oldsmobile F-85
1975-1976 Oldsmobile Cutlass
1971-1975 Pontiac Ventura
1968-1971 Buick Skylark
1968-1979 Chevrolet Camaro
1969-1979 Checker Marathon
1968-1992 Chevrolet Opala (Brazil)
L22 6 cylinder Chevy
The L22 was a 250-cubic-inch (4.1 L) I6 engine produced from 1967 to 1979. The '78 Camaro had 105 horsepower (78 kW) and 190 ft·lbf (260 N·m) of torque with the 250.
LD4 Chevrolet 6 cylinder
The LD4 was a 250-cubic-inch (4.1 L) I6 engine produced strictly in 1978.
LE3 6 cylinder Chevrolet
The LE3 was a 250-cubic-inch (4.1 L) I6 engine produced from 1979 to 1984.
292 C.I Chevrolet 6 cylinder
The 292 was only used in Chevrolet and GMC trucks; the block deck is taller, along with a relocated passenger-side engine mount. These were produced between 1963 to 1990; production of the engine shifted to Mexico after 1984.
L25 Chevrolet 6 cylinder
The L25 was GM's "last" pushrod straight-6 engine, produced from 1977 to 1988. It was used in Chevrolet trucks, displaced 292 cubic inches (4.8 L) and produced 115 hp (86 kW) and 215 ft·lbf (292 N·m).
The Chevrolet straight six has been used from the early days in sedans & trucks, It became popular with many hot rodders & racers. Over the years there have been many brands of headers, aluminum cylinder heads, hotter grind camshafts, 2 & 4 barrel manifolds + a huge range of multi carb intakes from speed equipment companies both large & small. Many back yard & home work shop creations have also been invented. lookup tool link here copy and paste to browser
this is the link chevy inline 6 engine Chevrolet six cylinder motor family Hot Sixes 6...

Posted on May 13, 2017

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 2,517 Answers

Could be a 194,230 or a 250 six cylinder engine.

Posted on May 13, 2017


1 Suggested Answer

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is the power of engine of chevrolet impala 1959

wonder how many different engines gm put in the 1959 chev
6 cyl or 8 cyl

Jul 14, 2017 | Chevrolet Cars & Trucks

1 Answer

Chevy inline 6 id numbers

GM can check it for you against the engine number.

Oct 14, 2014 | Cars & Trucks

1 Answer

1969 firebird

I guess my first question would be - what are your plans for the car ?
Totally stock, modified, or race ?
Totally stock would be the most valuable in terms of resale. Modified or race would limit the number and type of possible buyers.
It had a straight 6 cyl 250 - a 350 V8 - or 400 V8 when new. The VIN would tell you want the original engine was. And this was before GM swapped engines between brands. So the V8 engines were Pontiac built. The Pontiac 6 cyl was overhead cam.

Feb 15, 2014 | Cars & Trucks

1 Answer

3300 v6 Does this engine have an inline gas filter?

Of course it does(I think this is a GM engine,found in the Grand Am and other midsize cars).GM usually puts the inline filter behind the rocker panel under the car.

Nov 26, 2013 | Cars & Trucks

1 Answer

Have wire on PIN #21 of ECBM . Wiring chart says circut 818 . Also says not used without LGZ what is LGZ? It is vehicle speed sensor. I changed engine new 08 engine in 06 car have 08 TCM ECM and BCM ....

What engine ? could have come with three different one's ? 3.5 ,3.9, 5.3 LGZ is a RPO code - look at RPO sticker on your vehicle . Could be driver door jam ,glove box , maybe trunk .
Engine - Gas, 8 Cyl, 5.3L, SFI, ALUM, Cylinder Deactivation, GM
Engine - Flexible Fuel, (Gas/Ethanol), 6 Cyl, 3.5L, SFI, V6, Offset Bore, GM
Engine - Gas, 6 Cyl, 3.5L, SFI, V6, Offset Bore, GM

Do not see LGZ for 2006 impala
Engine Gas, 6 CYL, 3.4L, MFI, HO, GM
Engine Flexible Fuel, (Gas/Ethanol), 6 Cyl, 3.5L, SFI, V6, Offset Bore, GM
Engine Gas, 8 Cyl, 5.3L, SFI, ALUM, Cylinder Deactivation, GM
Engine Gas, 6 Cyl, 3.5L, SFI, V6, Offset Bore, GM
Engine Gas, 6 Cyl, 3.9L, SFI, V6, Offset Bore, GM
Engine, Gas, 6 CyL, 3.8L, MFI, HO, ERV6 Series
Engine Gas, 6 Cyl, 3.8L, MFI, V6, Supercharged

Regular Production Option (RPO) codes that are available on the vehicle. The vehicle's RPO list is printed on the Service Parts Identification Label.

When mixing parts from different model year vehicles in the electronic age one never knows what will happen . Try it an see what happens .

Jan 05, 2018 | 2008 Chevrolet Impala

1 Answer

Where is the number 4 spark plug

There is a cover on the passenger on top of the engine that needs to be removed first.Once the cover is removed starting from the front of the engine number 4 cyl is the fourth one back. If this engine is an inline 6 cyl 4.2 the cylinders are numbered starting from the front of the engine 123456 number 6 is closest to the firewall.

Nov 25, 2010 | 2004 Chevrolet TrailBlazer

1 Answer

Looking for engine size, in a '65 chev Vin # 164675J110610

Sorry for this picture being so small but if you go to LMC Truck .com you can see what all the numbers and letters your VIN number stand for.

To know what size of motor you have in the vehicle, you need the LETTERS that are stamped on the engine itself. The locations are:

For an inline 6:

The six cylinder engine letters are stamped on a pad on the right side of the engine at the rear of the distributor-
230 CID 6 CYL---TA, TE, OR TG
292 CID 6 CYL---UH OR UT

For a V-8:

The V8 engine letters are stamped on a pad immediately forward of the right hand cylinder head (driver's side head)-

There is no 350 CID installed in '65 in the Chevy.

Also, this info is for a your question here for a truck or car?

Nov 20, 2010 | Chevrolet Impala Cars & Trucks

1 Answer

I need the spark plug wiring for a 1993 jeep 4l from the engine to the distributor inline 6 cyl

The firing order can usually be found cast onto the intake manifold

4.0L engine Engine firing order: 1-5-3-6-2-4 Distributor rotation: Clockwise

Good luck (remember rated this help).

Aug 30, 2009 | 1993 Jeep Cherokee Country

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

411 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

85160 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

john h

Level 3 Expert

22181 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides