Question about 2008 Chevrolet Cobalt
Speedometer and odometer are not working. Rpm are working
It wouldn't be a ground problem If it were the whole instrument cluster would be dead . Checking the BCM an the IPC for DTC'S - diagnostic trouble codes is the proper way to diagnose this type problem . Not worrying about grounds .
The vehicle odometer is calculated and stored electronically in the body control module (BCM) and is sent via the serial data circuit to the instrument panel cluster (IPC) for display. The BCM calculates and stores the mileage based on the vehicle speed serial data information from the PCM/ECM. The IPC displays the season odometer information from the BCM in the driver information center (DIC). The odometer will display error if the IPC detects an invalid odometer data from the BCM. After an invalid odometer data is received from the BCM, the IPC will display the last known odometer reading for 1.5 seconds before error is displayed in the DIC.
The instrument panel cluster (IPC) displays the vehicle speed based on serial data message from the body control module (BCM). The BCM receives vehicle speed data from the PCM/ECM via the serial data circuit. The speedometer will default to 0 km/h (0 mph) if:
• The PCM/ECM detects a malfunction in the vehicle speed sensor circuit.
• The BCM detects a loss of serial data communications with the PCM/ECM.
• The IPC detects a loss of serial data communications with the BCM.
Your best bet would be to take it to the dealer !
Posted on Apr 19, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
What sounds like happened is that the instrument cluster fuse sounds like its burnt out. Otherwise the wires on the back of them both may have been knocked out. Very simple fix if its the fuse, if not, pull the cluster out and check the wiring. Hope this helps!
Posted on Dec 06, 2009
Tips for a great answer:
Apr 09, 2013 | 2005 Chevrolet Cobalt LT
Feb 25, 2013 | 2007 Chevrolet Cobalt Coupe
Oct 14, 2012 | 2008 Chevrolet Cobalt LS
Dec 02, 2017 | 2008 Chevrolet Cobalt
Jan 13, 2011 | 2008 Chevrolet Cobalt
Jan 03, 2010 | 2000 Chevrolet Silverado
Jul 29, 2009 | 1998 Nissan Frontier
Aug 19, 2018 | 2008 Chevrolet Cobalt
242 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: