07 Canyon Blinker issue

Sounds like a short in the turn signal switch or the rear tail lamp socket.

Check for power at the socket. If there is no power I would suspect the flasher relay wich supplies power to each bulb individually after it gets the right or left signal from the switch.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

YOU MAY HAVE AN INCORRECT BULB INSTALLED VERIFY BULB #"S IE: 6054 ETC....CONSULT OWNERS MANUAL

Your right rear turn signal bulb is blown.Replace the bulb and the fast blinking will stop.

Most likely the rear tail light assys.

check the rear bulb? or it maybe a bad socket in the front

Sounds like wrong bulbs in some sockets

check all bulbs,inspect sockets for corrosion,rust ,or sighns of overload.follow wires and check connectors if all good ,replace the flasher ,,if that doesnt fix it ,the blinker switch in the steering coulmn would be next

I have notice that this is a common problem. The socket most of the time goes bad, I don't know why but they just do. You can pick them up at any parts store for around 5.00 each. If you don't have a volt meter and ground straps to test it right, then I would try changing the sockets out. Quick and easy. Let us know how it goes.

exactly what does it do? please explain what happens when you press the brake turn on the light than brake signals ect.....