Question about 1999 Honda Accord

1 Answer

1999 HONDA ACCORD FACTORY KEY FOB PROGRAM - 1999 Honda Accord

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Loyalty:

    Visited the website for 30 consecutive days.

  • Expert
  • 83 Answers

Great news, you can program a 1999 Honda Accord Key Fob yourself. Simply follow these instructions:

Obtain all remote transmitters for this vehicle and read the instructions prior to programming.
Entering programming mode will erase all previously programmed remotes for this vehicle. You must have all remotes available for programming including working ones.

  • Enter vehicle and close all doors
  • Each of the following steps must be completed within five seconds of completing the previous step. If you take longer than five seconds or make a mistake, you must start the entire procedure over.
  • Insert the key into the ignition, hold one remote in your left hand with additional remotes close by. We recommend taking remotes off the key ring to perform the procedure. When the instructions say to press the LOCK button, you should press the LOCK button on the remote for approximately one second then release it.
Perform each of the next three steps in order, then repeat all three steps two more times for a total of three times each.
  1. Turn the ignition to the ON position, marked II.
  2. Press the LOCK button on the remote.
  3. Turn the ignition to the OFF position, marked I. (Do steps 1-3 three times)
Next, turn the ignition switch to ON position, marked II.
4. Using the same remote, press the LOCK button again. The door locks should cycle indicating the vehicle has ENTERED programming mode.
5. Using the same remote, press the LOCK button again. The door locks should cycle indicating the vehicle has PROGRAMMED that remote.
If you have other remotes to program then repeat step 5 with each additional remote one after another. Step 5 must be completed within ten seconds for each additional remote. You may program up to three remotes.
6. Turn the ignition to OFF. Test all remotes.
If your remote has a trunk button you will need to hold that button down for several seconds for that function to operate.

Posted on Sep 14, 2018

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: broken key fob

bought second hand fob now being reprogramed

Posted on Apr 13, 2009

Anonymous

  • 205 Answers

SOURCE: honda ridgeline key fob program

If it is a factory keyless system than you do need it done by the dealer, but if it is an after market system then reply back with manufacture and model.

Posted on Oct 17, 2009

Terry Corrow

johnny rebel

  • 10875 Answers

SOURCE: I lost my 2013 Honda accord key with fob factory alarm controls and I have another Honda accord key with remote control but it doesn't unlock or start ignition switch.... What can I do to program key

NUMBER 2,,,,,GO DIRECTLY TO YOUR HONDA DEALER!!

Posted on May 11, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 honda accord valet key will not start car


Based on my research, that Valet key has to be programmed by a dealership. There is a chip in that key that is not being recognized by the car. Your other key is programmed to be recognized by the car. there is a way to reprogram the keyless entry fobs, but not this Valet Key. call around because dealerships may vary wildly on cost. I once had one programmed for free. Good luck.

Apr 21, 2018 | Honda Cars & Trucks

1 Answer

Can I have a locksmith cut my honda key ?


Hi Novelet, Yes any lock smith will supply and cut a car key and if it has a key fob they can program them as well.....CHEERS..

Mar 31, 2016 | 2004 Honda Accord

1 Answer

I have just bought a 1997 Honda Accord SE. I was not given a key fob from factory installed keyless entry. Where can I pick one up which I can just manually program myself that won't be too expensive?


Best bet is ebay I've bought a fob from eBay for my honda in the past. You may have to call a dealership top figure out what fob number you need not all fobs will work for every honda

Apr 27, 2015 | 1997 Honda Accord SE

1 Answer

Programming a honda transponder key


did some quick research for you and found this easy and very clear step by step instructions on how to program your transponder car key to your vehicle.. this works for the following models though :

Accord 2003 to 2006

Civic 1999 to 2006

Element 2003 to 2006

Odyssey 1999 to 2006

Prelude1999 to 2001

Accord SE 1997

CR-V 1998 to 2006

Insight 2000 to 2006

Pilot 2002 to 2006



now here are the steps:


  1. Turn the ignition on
  2. Press Lock/Unlock within 4 seconds
  3. Turn ignition off and hen back on within 8 seconds
  4. Repeat steps 2-3 two times
  5. Press Lock/Unlock again within 4 seconds. The system should now lock and unlock the vehicle to indicate it is in programming mode.
  6. In the next 10 seconds: press Lock/Unlock button allowing the doors to lock/unlock once; then press lock/unlock button of each remaining key, allowing the doors to lock/unlock once.
  7. Switch ignition off and then remove the key


Civic 1996-1998

  1. Turn ignition on
  2. Press and hold the valet button which is situated on the radio within 5 seconds.
  3. System should now lock and unlock the vehicle indicating it is in the programming mode
  4. Within 5 seconds turn ignition OFF and press Lock/unlock on the remote fob to be programmed
  5. Within the next 10 seconds, press Lock or Unlock of any remaining keys, allowing the doors o lock or unlock once.
  6. Release valet key
  7. Switch ignition off and then remove the key


Radio remotes 2 and 3 button types

  1. Switch ignition on and repeat for 3 times.
  2. Press he lock button, switch the ignition off and back on and then press lock button again.
  3. System should now lock or unlock
  4. Press the lock button of all remotes to be coded. The car should acknowledge this by locking/unlocking each time
  5. Switch ignition off to exit the programming mode.


If you will have any further doubts or question to ask i suggest you to check out the page where i found this which is http://www.carkeyadvice.com/step-by-step-fob-programming-guides/honda :) i hope this was the solution you were looking for mate! happy happy new year!

Dec 30, 2012 | 2007 Honda Pilot

1 Answer

I have a 2004 Honda Accord EX. Key Fob works trunk but not doors


Programming
When
Key added or replaced. System malfunction.
How
Obtain all keys. A maximum of 3 keys can be programmed. Close all doors and boot/tailgate. Switch ignition ON. Repeat procedure below 3 times: Within 4 seconds: Press key lock or unlock button. Within 4 seconds: Switch ignition OFF. Within 4 seconds: Switch ignition ON. Within 4 seconds: Press key lock or unlock button. System should now lock or unlock vehicle. Within 4 seconds: Press key lock or unlock button. Within 10 seconds: Press lock or unlock button of first key. System should now lock or unlock vehicle. Press lock or unlock button of second key. System should now lock or unlock vehicle. Press lock or unlock button of third key. System should now lock or unlock vehicle. Switch ignition OFF. Remove key. Check operation of all programmed keys.
NOTE: If less than 3 keys are to be programmed, remove ignition key after programming last key.

Jan 25, 2010 | 2004 Honda Accord

2 Answers

Honda ridgeline key fob program


If it is a factory keyless system than you do need it done by the dealer, but if it is an after market system then reply back with manufacture and model.

Oct 17, 2009 | 2006 Honda Ridgeline

1 Answer

Program key fob for 2003 Honda civic


Contact our local Honda dealer with your VIN# they can provide you the code from it Honda's are NOT coded by year the are coded by VIN# at the bottom of windshield

Jul 22, 2009 | Nissan Maxima Cars & Trucks

2 Answers

Broken key fob


bought second hand fob now being reprogramed

Apr 12, 2009 | 1997 Honda Accord

1 Answer

How do I program a factory key FOB to my 1999 Cadillac Escalade?


Can not recall of the top of my mind, But when i need to get mine recone i just6 took it to the dealer and they were more then happy to help. Free of charge, Good luck

Apr 08, 2009 | 2003 Cadillac Escalade Esv

Not finding what you are looking for?
1999 Honda Accord Logo

Related Topics:

210 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...