SOURCE: my 1997 gmc sonoma
This the problem with IAT bad inlet air temp (IAT) sensor.Get it replaced....................
SOURCE: starter motor
It's easy, 2 9/16 bolts, remember to disconnect battery and make a note of the wiring on the starter.
SOURCE: transmision shifting problem
Reverse is not sycronized, this means the gears have to stop to mess and not grind, two thing cause this, being to quick to slam into reverse after clutch is depressed, a problem with the clutch.
SOURCE: what is the firing order for a 91' 4.3l gmc
Firing order 1-6-5-4-3-2. cylinder's 2-4-6 on right side
cylinder's 1-3-5 on left side.
SOURCE: Need serpentine belt diagram
My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I have only been a free contributor to this site for the past 4-months.
I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.
CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/1991/make/gmc/model/sonoma/1991_gmc_sonoma_drive_belt_routing_diagram.htm
266 views
Usually answered in minutes!
×