SOURCE: i need a fuse panel diagram for a 1987 bmw 325i
your car has double squirrel cage fan. Odds are it is not the fuse. The brushes wear out in motor and it does not make contact causing it not to work. Try this. Open hood on firewall behind intake(aluminum part where it says bmw) the fire wall has bolts in it. The fan access is behind there. First i would try hitting that area a hammer to try to bounce the contacts of the blower motor. Do this while the fan is in the on position. If that does not work remove the screws and the fan is behind there. There is a resistor and a motor behind there. A giant clip holds it in. You have to be inclined to change it
SOURCE: need serpentine belt diagram for 1994 bmw 325i
Below are diagrams for both the M44 and the M50 engines. On the M44, you may need to hold the tensioner in the retracted position with a drill bit or hex tool through the hole in the front of the tensioner. The belt tensioner is automatic so no tightening is necessary. Best of luck!
Greg
M44
M50
SOURCE: Where can I find a fuse box diagram for a 2006 BMW
Check this...
Link HERE
Hope this help you.
SOURCE: how to reset the tire pressure monitor on a 2006
go into to service requirments and re intiialize tpm or ftm car must not be rolling to do this
SOURCE: how to reset a window motor for 2006 BMW 325i
Ignition on,window must an up,and press and hold button window downHOLD,HOLD,5.second! Now press and hold button window upHOLD,HOLD,5.second! And last once again press and hold downHOLD,HOLD,5.second! That's it! Please Check out now,press button- window to pull up automatically So programmed with a window! if you need more windows, a process repeated at the next window.
430 views
Usually answered in minutes!
×