SOURCE: 2000 plymouth grand voyager 3.3 V6, loud noise in serpentine belt area
remove belt and check the pulleys. this belt routing is odd and its very tight. i have seen many failed tensoner pulleys on these. it should spin smoothly and quiet. and grinding or bumpyness in it and i would replace it. check all pulleys while your there. they are not expensive.
good luck,
Michael
SOURCE: SCHEMATIC FOR SERPENTINE BELT 1990 PLYMOUTH VOYAGER
There should be a drawing of it on the front cross member at the front of the car. Mine is, I have the manual in front of me but like you say, there are quite a few different versions, I`ve just changed the serpentine belt on my chrysler grand voyager 2.5CRD diesel because the alternator froze up and wrecked the belt. It was a very simple job because the drawing was on the front cross member of the car. Let me know the engine and I`ll try to explain the routing to you. Ian
SOURCE: my 1999 plymouth voyager van's radiator fan constantly on
There is a fan relay in the fuse box in the engine compartment. Usually that is the reason why it won't turn off. It fuses in the on position. If you have the manual it will say which one is the fan relay. just pull it out and get a new one. They are not expensive.
Hope this helps
SOURCE: Needed serpentine belt diagram for a 91 ply. voyager 3.3L engine
Here's a link to the diagram you need...
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7006
Good luck and please rate this solution. Thanks.
Testimonial: "Looks good."
SOURCE: Serpentine diagram for a 1997 Plymouth Voyager
Make a drawing of where the belt and pulleys are before you remove the belt. You won't need a diagram,you will have made your own and be done before you ever find one,unless you have a shop manual already.
51 views
Usually answered in minutes!
×