2004 Chrysler Sebring Logo

Related Topics:

w
wesley Posted on Apr 02, 2017
Be the first to answer

04 sebring 2.4l dohc valve cover bolt specifi cations

Answer This Question

2 Related Answers

Anonymous

  • 94 Answers
  • Posted on Feb 09, 2011

SOURCE: Crank shaft bolt torque specs for 2001 chrysler

lcorgiat_49.jpgthe dampner is the crank bolt

Testimonial: "This expert is amazing, smart and extremly helpful."

Ad
paulmacin18247

paulmacintyre

  • 3218 Answers
  • Posted on Apr 05, 2015

SOURCE: How to change and replace valve cover gaskets in a 2004 Chrysler Sebring Convertible 2.7L DOHC V6

You first have to remove the ignition coils or plug wires and then remove the bolts holding the cover to the cylinder head. Discard old gasket. Clean gasket channel of any oil and install new gasket to cover taking care during assembly not to disturb gasket when placing cover back on cylinder head. The rear gasket is much harder to change as the upper plenum must be removed to access this cover. You should have some knowledge of engines if you are going to atempt this repair on your own

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Torque for mazdq astina 1800 es
You will need to give much more information. Vehicle make, model, year, engine, fuel type and what the nut or bolt is actually for. There are hundreds of nuts and bolts on any car and each one is a different torque setting. Without knowing which one your referring to you probably won't get your question answered.
Read full answer
Nov 08, 2022 • Cars & Trucks
0helpful
1answer

Changhing valve cover gasket 03 mitz galant 3.0 v6
  1. Disconnect the negative battery cable.
  2. Remove the upper intake manifold.
  3. On the 3.0L DOHC engine, remove the ignition wire cover.
  4. Remove the ignition wires and spark plugs.
  5. Remove the crankcase ventilation tubes from both valve covers.
  6. Remove the retaining nuts and engine wiring from both valve covers and move aside.
  7. Remove the valve cover retaining bolts and studs.
  8. Remove both valve covers from the engine.
To install:
  1. Clean the valve cover gasket sealing surfaces.
  2. Install new valve cover gaskets onto the valve covers.
  3. Place the valve covers into position.
  4. Reinstall the valve cover retaining bolts and studs and tighten in sequence to:

    3.0L SOHC engine: 7 ft. lbs. (9 Nm)3.0L DOHC engine: 42-54 inch lbs. (4-5 Nm)3.5L engine: 30 inch lbs. (3 Nm)
  5. Install the engine wiring and tighten the retaining nuts.
  6. Install the crankcase ventilation tubes into both valve covers.
  7. Install the ignition wire separators, the ignition wires, and the spark plugs.
  8. On the 3.0L DOHC engine, install the ignition wire cover.
  9. Install the upper intake manifold as described in this section.
  10. Connect the negative battery cable.
  11. Run the engine and check for leaks and proper operation.
Read full answer
Jun 25, 2017 • Cars & Trucks
1helpful
1answer

Chrysler Sebring 2001 3.0 v 6 sohc interference motor or non interference I've seen answers that it was and then it wasn't
Chrysler
  • 1.4L, 1.5L & 1.6L Interference
  • 1.7L Non-Interference
  • 1.8L Interference
  • 2.0L DOHC Interference
  • 2.0L SOHC Interference
  • 2.2L DOHC Interference
  • 2.2L SOHC Non-Interference
  • 2.22L SOHC Interference
  • 2.3L Diesel Interference
  • 2.4L DOHC Non-Interference (Valves may hit if camshafts turn out of time)
  • 2.4L SOHC Interference
  • 2.5L 4 Cyl. Non-Interference
  • 2.5L V6 Interference
  • 3.0L SOHC 12 Valve Engine Non-Interference
  • 3.0L DOHC Interference
  • 3.0L SOHC 24 Valve Engine Interference
  • 3.2L Interference
  • 3.5L Interference
  • 4.0L Interference
  • this should be what your looking for.
Read full answer
Dec 10, 2015 • Chrysler Cars & Trucks
0helpful
1answer

How to change and replace valve cover gaskets in a 2004 Chrysler Sebring Convertible 2.7L DOHC V6
You first have to remove the ignition coils or plug wires and then remove the bolts holding the cover to the cylinder head. Discard old gasket. Clean gasket channel of any oil and install new gasket to cover taking care during assembly not to disturb gasket when placing cover back on cylinder head. The rear gasket is much harder to change as the upper plenum must be removed to access this cover. You should have some knowledge of engines if you are going to atempt this repair on your own
Read full answer
Apr 05, 2015 • Chrysler Cars & Trucks
0helpful
1answer

04 sebring lx 2.4 16 valve dohc. Oil leaked out loose oil filter while driving.While driving the engine slowed and quit.Have the car at home .Engine is not seized added oil ,filter is tight ,just wont...
No auto shutoff that I'm aware of. Check cam and crank sensor if you're not getting good spark
Read full answer
Jun 26, 2017 • 2004 Chrysler Sebring
1helpful
1answer

What is the torque specs for 2002 Sonata 2.4 dohc valve cover bolts?
Valve cover bolts are in most cases reusable unless rounded off or striped. If the bolts are m6 89in/lbs should be good m8 105 in/lbs.
Read full answer
Feb 18, 2013 • Hyundai Motor 2004 Sonata
0helpful
1answer

04 jeep liberty oil leak, runs down on exhaust manifold, changed valve cover gaskets, didn't help, can't see where it's comming from, back right side of motor where its most oily
Try checking the oil pressure sensor
Read full answer
Sep 14, 2012 • 2004 Chrysler Sebring
0helpful
1answer

Leaking valve cover gaskets - repair estimate $1000.00. Is it worth it?
no it is not worth that much, you can do it yourself for about 20-40 dollars (price of the gaskets)

follow these for better instructions go to www.autozone.com and register to become a member
this will give you access to their repair database there you can specify your car and get repair info.

Removal & Installation2.0L Spi Engine
  1. Loosen the clamp and disconnect the engine air cleaner to valve cover hose from the valve cover.
  2. Remove the two ignition wire separators from the valve cover. Position the spark plug wires aside.
  3. Remove the three valve cover bolts and remove the valve cover and gasket.

To install:

CAUTION Do not use abrasive grinding discs to remove gasket material; only use manual scrapers. Do not scratch or gouge aluminum sealing surfaces or oil leaks may occur.

NOTE Do not use any sealer with a silicone-type gasket.
  1. Install the three valve cover bolts and remove the valve cover and gasket.
  2. Install the two ignition wire separators from the valve cover.
  3. Tighten the clamp and disconnect the engine air cleaner to valve cover hose from the valve cover.

2.0L Zetec Engine
  1. Disconnect the crankcase ventilation hose from the fitting on the valve cover.
  2. Disconnect the wiring connector at the oil control solenoid.
  3. Disconnect the speed control (if equipped) and the accelerator control cable.
  4. Position aside the accelerator cable.
  5. If equipped, disconnect the speed control cable from the bracket and position aside.
  6. Remove the ignition wires from the spark plugs.
  7. Remove the bolts and position the upper timing belt cover away from the valve cover.
  8. Remove the valve cover.
  9. Fully loosen the ten bolts.
  10. Remove the valve cover and valve cover gasket.
  11. Inspect the valve cover for damage. Install new cover as required.
    CAUTION Do not scratch or gouge aluminum sealing surfaces or oil leaks may occur.
  12. Clean and inspect the sealing surfaces of the valve cover and the cylinder head. Both surfaces must be clean and flat.

To install:
  1. The valve cover gasket and the valve cover must be installed and the bolts tightened to specification within four minutes of sealant application.
  2. Apply a 0.1 inch (3mm) bead of silicone sealant in two places where the front camshaft bearing cap meets the cylinder head.
  3. Install the valve cover.
  4. Position the valve cover gasket.
  5. Position the valve cover.
  6. Tighten bolts in the sequence shown.

    0996b43f80204dc3.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. The proper torque sequence for the 2.0L DOHC Zetec engine

  7. Install the upper timing belt cover bolts.
  8. Install the ignition wires.
  9. Connect the oil control solenoid connector.
  10. Connect the crankcase ventilation hose.
  11. Connect the speed control (if equipped) and the accelerator control cables.
  12. If equipped, connect the speed control cable to the bracket.





If you need further help, reach me via phone at https://www.6ya.com/expert/michael_17692f6169bfde50

Read full answer
May 13, 2011 • 2001 Ford Escort ZX2
2helpful
2answers

Crank shaft bolt torque specs for 2001 chrysler sebring 2.7 dohc
lcorgiat_49.jpgthe dampner is the crank bolt
Read full answer
Feb 09, 2011 • 2001 Chrysler Sebring
2helpful
1answer

How to replace valve cover gaskets on a 2000 mazda millenia w/ 2.3 DOHC Supercharger?
just look at the valve covers some are held in place with 6 bolts some only 3 do one at a time and keep working area clean and free of dirt n grease. clean valve cover good and have clean hands when handling gasket, and there your done just replace and bolt down , check bolts again for tightness in a couple weeks.
Read full answer
Apr 25, 2010 • 2000 Mazda Millenia
Not finding what you are looking for?

View Most Popular

2004 Sebring

  • Cars & Trucks

Related Question

Torque for mazdq astina 1800 es

  • Cars & Trucks

196 views

Ask a Question

Usually answered in minutes!

Popular Questions

2012 chrysler 200 serpentine belt diagram

2007 Chrysler Sebring Sedan

My electronic throttle control warning light came

2007 Chrysler Sebring Sedan

COMO PONER LA CADENA DE

2007 Chrysler Sebring Sedan

CODES,P0442,P0455,P0456,P1684

2002 Chrysler Sebring

Car Won't Fully Shift into Park

2004 Chrysler Sebring

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...