Where is the solenoid on a 2006 Kia Sportage lx 4 cylinder engine

SOURCE: 2001 kia sportage 80,000 miles 2.0

maybe plug wire corroded

Mike Butler

• 6674 Answers
• Posted on Mar 01, 2009

SOURCE: 2006 sportage timing belt- how to change

Here you go, just ignore part about removing sprockets. Click on pictures for larger view.

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152801bca65

SOURCE: missfire on #4 cylinder for 1998 kia sportage

had the same problem....broken spark plug. try replacing your plugs.

SOURCE: Starter for kia sportage 2000

1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
2. Drain the engine oil.
3. Remove or disconnect the following:
   
   Negative battery cable Intake manifold bracket upper bolts Clutch release cylinder and move it aside, if equipped Intake manifold bracket lower bolts and remove the bracket Starter from the clutch, manual transmissions only Starter from the torque converter, automatic transmissions only Starter electrical connectors Move the transmission wire harness aside Starter
   
   
   Fig. Exploded view of the starter
   

1. Install or connect the following:
   
   Starter to the engine well Starter electrical connectors Lower intake manifold bracket and install the upper bolts Starter into position. When aligned properly torque the bolts to 40 ft. lbs. (54 Nm). Torque the intake manifold bracket bolts to 40 ft. lbs. (54 Nm). Properly position the clutch release cylinder, if equipped. Torque the bolts to 40 ft. lbs. (54 Nm). Torque the intake manifold bracket upper bolts to 40 ft. lbs. (54 Nm). Negative battery cable

SOURCE: torque setting cylinder head bolt 4 cylinder KIA sportage

I need the torque settings and pattern for a Kia Sportage 2.2