How to top the timing belt of isuzu gemine 4fb1

for heavy machinery cars etc. luckily there are many websites
that can help you repair
for eg site like reliable-store is very active in this.. instant help, emails and all that's fantastic

try this link.... What is the valve clearance of 4fb1 engine Google Search

Vauxhall used the isuzu engine for many years.

lash on 2004
USA car>? no country stated,
why is your Rodeo engine not listed in the WIKI.?

http://en.wikipedia.org/wiki/Isuzu_Wizard

i google
4fd1 i see 4fB1 and 4fC1 but no 4FD1.?

yours missed this list too.
http://en.wikipedia.org/wiki/List_of_Isuzu_engines

if real add it. to the list.

Google returns lots of others using wrong ENGINE ID.
so i guess bingo that?

if for a g161z ngk bp6es (1.6ltr) , the 1.5 ltr eng 4xc1 ngk bpr5es-11 and the 2 ltr g200 ngk bp6es. hope that helps you

Here are diagrams for the timing belts and the timing marks for replacing the timing belt on the 1998 Isuzu trooper. Hope this helps.

http://www.2carpros.com/diagrams/isuzu/trooper/1998

We are talking about the Timing Belt and not the Drive/Surpentine Belt?

For the Timing Belt: CLICK on the following Link. It has all the Diagrams you will need for the Timing Belt.
http://www.2carpros.com/car_repair_information/year/1983/make/isuzu/model/pickup/1983_isuzu_pickup_timing_belt_diagram_marks.htm

For the Drive/Surpentine Belt: CLICK on the following Link. It has all the Diagrams you will need for the Drive/Surpentine Belt.
http://www.2carpros.com/car_repair_information/year/1995/make/isuzu/model/rodeo/1995_isuzu_rodeo_drive_belt_routing_diagram.htm

Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!

My toshiba Tecra M2 displays # E 0 error message when bootin. please how can I resolve this?

Sounds 180 degrees out. Move flywheel to top dead center. Remove timing belt and turn flywheel pulley ONE complete turn to top dead center. Then put timing belt back on with marks lined up.

The Isuzu has a timing pump driven water pump, so if the timing belt is due to be replaced, both jobs are normally done at the same time along with replacing the timing belt tensioner pulley. It'a an "interference" type engine that bends the valves if the belt breaks and ruins the engine. The reason the shops want $700 is because they're doing a complete timing belt replacement to get to the water pump.