Where is the egr valve located at on a dodge strtus 2004

Question edited for clarity.
Question moved to model category.

3.9L EGR valve location

Dakota Durango Forum https://www.dakota-durango.com > threads > 3-9l-egr-...
OBD-II trucks (96 and up) didn't have EGR any longer. If it did it would have a tube coming off the passenger side exhaust manafold and running to the EGR valve ...

2000 dodge dakota egr valve location

Fixya https://www.fixya.com > ... > Cars & Trucks > Dodge
4 hours ago - On a 2005 Dakota with 4.7 liter engine (non-HO), the EGR valve is located near the intake manifold on the driver's side right up against the ...

SOLVED: Where is egr valve on 2000 dodge durango - Fixya
Oct 26, 2008
Where is the EGR valve located on a dodge durango - Fixya
Feb 5, 2009
How to reach the EGR valve on a 2000 dodge durango - Fixya
Oct 15, 2015
Where is the location of the egr valve on the 4.7 liter engine
Nov 17, 2019
More results from www.fixya.com

Where is the EGR on the 4.7L? ' DODGE RAM FORUM ...

www.ramforum.com > ... > Tech Info

You bet you've got an EGR on that 4.7. The electronic EGR valve and solenoid assembly (3) is attached to the rear of the left cylinder head. An exhaust gas routing tube (1) connects the EGR valve to the intake manifold.

Videos showing how to replace

https://www.google.com/search?q=egr+valve+on+2004+dodge+1500+4.7+engine

..

, the EGR on a 4.7 is attached to the rear of the left cylinder head, instead of on the front of the right cylinder for the 5.7.

I googled this Hope it helps.

needs re setting as the egr valve could set off the sensor on the exhaust

Operate your keyless entry/alarm on and off a few times then try to start.

Replace the EGR valve. Very common code.

v-6 lr firewall area under hood drivers side

An EGR valve assembly located at the front of the intake manifold. The EGR valve is a poppet style valve (on/off only) and is controlled by an internal diaphragm.



Fig. EGR location and associated components-California diesel

Hope helps (remember to rate this and comment ).

The electronic EGR valve and solenoid assembly is attached to the rear of the left cylinder head ,

1. Remove electrical connector (5) at top of EGR valve solenoid.
2. Remove tube mounting bolt (1) at intake manifold.

1. Remove two bolts (4) connecting EGR tube (1) to valve assembly.
2. Remove gasket located between EGR tube flange and EGR valve assembly.
3. Remove two EGR valve mounting bolts (5).
4. Separate valve assembly (3) from engine.
5. Remove and discard metal gasket located between cylinder head and valve assembly.

INSTALLATION

1. Clean area at rear of left cylinder head where it joins base of EGR valve.
2. Clean EGR tube where it joins EGR valve.
3. Position new gasket between EGR valve and cylinder head.
4. Position EGR valve to cylinder head. Install and tighten two bolts (5). Refer to Torque Specifications.
5. Position new gasket between EGR tube flange and EGR valve assembly.
6. Position EGR tube (1) to side of EGR valve and into intake manifold.
   1. Install EGR tube flange bolt (1) at intake manifold. Tighten bolt. Refer to Torque Specifications.
   2. Connect electrical connector (5) to top of EGR valve solenoid (2).Do a final tightening of two EGR tube bolts (4). Refer to Torque Specifications

I repair mine last summer,
It is on the exast port, left.
You have a tube attach to it, going in the Head Cover.
Easy to change. it cost me $105.00CND at the dealer

Good Luck
Jonathan Lévesque