Cars & Trucks Logo

Related Topics:

William Denny Posted on Mar 29, 2017

Where is the knock sensor on an 82 chevy 350 corvette?

5 Related Answers

Anonymous

  • 323 Answers
  • Posted on Jun 15, 2009

SOURCE: 88 chevy 350 knocking or pinging near front of engine

Just for the heck of it, have you tried upiing the gasoline one grade?

Ad

Jose Morillo

  • 76 Answers
  • Posted on Sep 22, 2009

SOURCE: 1992 caprice problems

CHECK CABLES FROM COMPUTER HARNES TO MOTOR DOESN'T TOUCH EXHAUST MANIFOLD
CHECK GROUND CONTACT BETWEEN MODULE INSIDE DISTRIBUITOR AND NEGATIVE OF BATTERY

Timothy Reed

  • 181 Answers
  • Posted on Feb 18, 2010

SOURCE: i have a 1982 chevy truck with an 88 350 sbc with 82 distributar

Double check your timing.Make sure the wire going to the BAT side of dist. is hot. That dist. should work just fine DRIVE SAFELY TIM

adrian halligan

  • 1075 Answers
  • Posted on Jul 02, 2010

SOURCE: 95 chevy 350 should ther b water come out when u

are your talking about the knock sensor on the lower engine if so and you have water coming out you have a big problem.i think you have the wrong sensor infact i think you have a water sensor.adrian,,,,

ultrat

Mot Smith

  • 500 Answers
  • Posted on Apr 04, 2011

SOURCE: where is the knock sensor on a 1994 Chevy 350

I believe its located rt side rear. just a little lower where head seperates from block..

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Can i put a 1981 Corvette 350 engine in a 1988 IROC with 305 tune port , and still use the tune port?

Yes, you will need to transfer all peripheral sensors and the intake and injection from the Camaro engine to the Corvette engine, But the beauty of a small block chevy is that most everything interchanges. One thing to make sure you get correct is the flywheel. Count the teeth and make sure they match. You will need the correct balanced flywheel and balancer for the Corvette engine, and double check the length and rotation of the waterpump.
0helpful
1answer

95 chevy 350 should ther b water come out when u pull out the knock sensor

are your talking about the knock sensor on the lower engine if so and you have water coming out you have a big problem.i think you have the wrong sensor infact i think you have a water sensor.adrian,,,,
0helpful
1answer

I have a 1982 chevy truck with an 88 350 sbc with 82 distributar

Double check your timing.Make sure the wire going to the BAT side of dist. is hot. That dist. should work just fine DRIVE SAFELY TIM
0helpful
2answers

How to replace knock sensor on 1998 corvette?

the knock sensors are on the side of the engine block. they screw directly into the block. most easily accessed with the car raised up
4helpful
3answers

Can you tll me where the knock sensor is on a chevy silverdao 2004

THE KNOCK SENSORS 2 OF THEM ARE UNDER THE INTAKE ON TOP OF THE BLOCK,NOT EASY TO GET AT. 4.8 5.3 6.0 ALL AT THE SAME PLACE
1helpful
1answer

88 chevy 350 knocking or pinging near front of engine

Just for the heck of it, have you tried upiing the gasoline one grade?
0helpful
1answer

1992 caprice problems

CHECK CABLES FROM COMPUTER HARNES TO MOTOR DOESN'T TOUCH EXHAUST MANIFOLD
CHECK GROUND CONTACT BETWEEN MODULE INSIDE DISTRIBUITOR AND NEGATIVE OF BATTERY
0helpful
2answers
Not finding what you are looking for?

97 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...