Question about 1999 Chevrolet Venture

Open Question

Replacing damaged VTD switch/99 chevy venture

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 7353 Answers

SOURCE: 99 Chevy Venture dash board lights and tail lights

So are the fuses getting power, they should be labeled. like tail or ctsy, or inst? The dash lights are usually 5 amps. You will need to get a wiring diagram to ck it out. but you may need to start by looking at the headlamp switch. I cant believe any GM dealer could not help you. Forget anyone from a auto parts store being any help. I can ck tomorrow when at work for a diagram.

Posted on Apr 22, 2010

Ad
gh20s
  • 343 Answers

SOURCE: the drive belt for my 99/ chevy venture is broke

Check all of the pulley grooves for debris and run a wire brush over them a few times. Also check the tensioner by removing the bolt in the center of it. If it looks ok, still remove the bolt because you have a 90% chance that it will fall apart when you remove it. The bolt holds it together if they break internally so it doesn't leave you stranded somewhere.

Posted on May 21, 2010

HansPP
  • 2510 Answers

SOURCE: 99 chevy venture i have no tail lights, no turn

It sounds like a bad connection on the rear wire harness. Check all your connections working forwards from the rear light system.

Posted on Jan 22, 2011

1ATony
  • 159 Answers

SOURCE: 99 CHEVY VENTURE HOW TO GET AT AND REPLACE DRIVER

Here's a great video that will show you how to replace your door lock actuator.">

Posted on Feb 16, 2011

1ATony
  • 159 Answers

SOURCE: 99 chevy venture front sway bar broke

The sway bar is pretty easy to fix. Here's a video that will show you exactly how to change the one in your Chevy Venture.">

Posted on Feb 22, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chevy Venture 99 low beams don't work but high beams always working


I would start with checking the headlight bulbs (slim to none possibility but starting point) next go to the headlight switch.

Aug 09, 2017 | Chevrolet Cars & Trucks

1 Answer

99 chevy venture i have no tail lights, no turn signle lights, or brake lights, do i have bad turn switch?


It sounds like a bad connection on the rear wire harness. Check all your connections working forwards from the rear light system.

Jan 22, 2011 | 1999 Chevrolet Venture

1 Answer

Just had new brake line , brake pads, rotors installed on my 99 chevy venture van, after coming out of the shop the abs light is staying on, why? thanks


Because you now have an ASB System Malfunction

Most common cause is a Wheel Speed Sensor

Now--was it damaged by the repair shop

or did they not bleed the system correctly

or not clear the ABS Light?

Dec 04, 2010 | 1999 Chevrolet Venture

1 Answer

99' chevy venture trans "slipping"


change it youll b fine i drive a 99 camaro with 165000 miles on it and i change my tranny fluid every 30000 miles if not comfortable doin that try slick 50 first

May 18, 2010 | 1999 Chevrolet Venture

1 Answer

99 Chevy Venture dash board lights and tail lights


So are the fuses getting power, they should be labeled. like tail or ctsy, or inst? The dash lights are usually 5 amps. You will need to get a wiring diagram to ck it out. but you may need to start by looking at the headlamp switch. I cant believe any GM dealer could not help you. Forget anyone from a auto parts store being any help. I can ck tomorrow when at work for a diagram.

Apr 22, 2010 | 1999 Chevrolet Venture

2 Answers

99 chevy venture front sway bar broke


The sway bar is pretty easy to fix. Here's a video that will show you exactly how to change the one in your Chevy Venture.">

Feb 22, 2010 | 1999 Chevrolet Venture

1 Answer

Power door lock on the chevy venture 2000 don't


check the system fuse and or circuit breaker. check the switch wires for damage and loose connections. check the switches for continuity. remove the door panel(s) and check the actuator wiring connections to see if they're loose or damaged. inspect the actuator rods if equipped to make sure they arn't bent or damaged or loose connections. the actuator can ce momentarily. a discernible click indicates that the solenoid is operating properly.

Nov 17, 2009 | 2000 Chevrolet Venture

1 Answer

I BOUGHT A 99 CHEVY VENTURE IT WANT START,SOMEONE TOLD ME TO BANG ON THE FUEL TANK AND TRY IT I DID AND IT STARTED AN RAN FOR 5 MINUTES WHATS THE PROBLEM


fuel pump. Chevy fuel pumps have a tendency to freeze up, banging on the tank frees it up momentarily, but once it freezes the first time the damage is done and the pump needs to be replaced. if you buy a pump and a Haynes manual at your local parts store and DIY you could probably save about 50% of your bill if you'd taken it to a shop. It's not a hard fix.

Oct 08, 2009 | 1999 Chevrolet Venture

2 Answers

99 CHEVY VENTURE HOW TO GET AT AND REPLACE DRIVER SIDE ACTUATOR TO OPEN AND CLOSE DOORS.


Here's a great video that will show you how to replace your door lock actuator.">

Jul 18, 2009 | 1999 Chevrolet Venture

Not finding what you are looking for?
1999 Chevrolet Venture Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...