You will have to program the key to the new system. It should be simple steps you can do yourself w/ a YouTube instruction video. If this doesnt work, you'll need a new ignition.
SOURCE: Replacing Murano 2005 seat with 2004-wiring harness different
the new seat probaly has diffarent features mabe one has heated the other doesnt i would get a taredown manual and check the wiring diaogram and see what is shown from one seat to the other
SOURCE: clicking noise car won't start
If you hear a clicking when you try to start your car, but it won't start, the most likely cause is a very low battery. Next most likely is a poor connection somewhere, most likely at one or both of the battery posts or terminals.
SOURCE: Replace rear wiper on 2005 Murano
You probably already figured this out, but you have to remove the wiper arm completely in order to replace the wiper blade.
The blades are an unusual size (somewhere around 14 1/2") and I believe they are only available from a Nissan dealership. They include printed instructions in the box but just in case, this is from the official Nissan service manual:
SOURCE: fitting instruction for side steps on nissan murano 07 model
So you going to install after market steps? they should come with instructions.....
may be you should make a diagnostic and you can do it in a garage or you can do it by yourself if you want to do it by yourself you need some tools and you can find some good ones here: diyobd2.fr
123 views
Usually answered in minutes!
×