1999 Jeep Grand Cherokee Logo
Anonymous Posted on Jul 24, 2009

No light on dash when parking brake engaged

I have a 99 Jeep Grand Cherokee LTD, 6cyl,4.0L, Awd, Auto. When I engage the parking brake the brake indicator light on the dash DOES NOT light. The light is working because when I turn on the ignition it goes on with all the other gauges. Is there such a thing as a parking brake switch or sensor or relay? If so could that be the problem and how do I fix. Thank You In Advance for your help.

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

  • Master 1,627 Answers
  • Posted on Jul 24, 2009
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

Joined: Jul 23, 2009
Answers
1627
Questions
1
Helped
700156
Points
5206

Ther is a micro-switch on the park brake linkage and it is either defective or out of adjustment.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Parking brake light comes on when driving

is this light on the dash the same one that iluminates when you engage the hand brake" if so it may be a faulty micro switch that operates when hand brake is applied they are useually located at the base of the leaver.. hope this helps. regards steve..
2helpful
1answer

1995 jeep grand cherokee rolls when in park

parking prawl in transmission not engaging or the linkage needs adjusting to get the parking prawl pushed up far enough to engage.
0helpful
1answer

Auto Transmission will only go into drive from second gear

It should be an electronic problem Scan the transmission and post the codes
6helpful
1answer

Cruise control no go when button is pushed

I press the control switch on my 1999 Jeep cherokee. the cruise light doesn't come on and the cruise does not engage. Please offer a solution.
0helpful
1answer

'96 Jeep Grand Cherokee parking break doesn't work

check the rear brakes. Possible they are out of adjustment or worn shoes.
0helpful
1answer
1helpful
1answer

2000 jeep grand cherokee laredo has scrubbing noise coming from rear of vehicle and park brake does not engage

It sounds as though you have a frozen emergency brake cable. This usually will wear down the rear brake shoes to a point where they are metal to metal. Get them fixed asap.
0helpful
1answer

2000 Jeep Grand Cherokee Ltd 4.0L A/C problems

this is most likely a a lack of r-134a (as freon is no longer used), if your system is completely out or close to it then the pressure sensor will not allow the compressor clutch to engage, it is also possible that there is an electrical issue but less likely. to know for sure you need to put some gauges on the system
0helpful
1answer

1994 jeep awd 5.2l park dont engage and makes clicking noise when

i would have this fix asap ,could cause internal transm. damage!
Not finding what you are looking for?

427 views

Ask a Question

Usually answered in minutes!

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...