What size torx head for 89 olds 88 - 88 Oldsmobile Cars & Trucks

SOURCE: Bronco fuel pump 89 to 88

i dont think they will. you would be better off finding the right one versus trying to make something work and then you might have even more problems to deal with

skiffy99

• 21 Answers
• Posted on Jun 25, 2009

SOURCE: i want to replace flasher on 89 olds 88 where is it

If you mean the blinker bulb, they are either set in behind the front bumper, where you see the orange/white colored glass (directly beneath the headlights)....OR the side blinkers, which are accessed by opening the hood and reaching in from the inside.

The rear blinkers are able to be accessed by opening the hood, and removing a small (phillips head) screw on the top of the vertical tail light housing. These lights serve as blinkers and brake lights, and there are two in each housing. Hope that helps! :)

SOURCE: what size torx bit do i need to remove the screw

if its the front you want to change,its a t60 torx,hope this helps

SOURCE: what size is the torx head on the brake calipers

should be a t50... good luck

SOURCE: what size torx socket fits the head bolts 1.8

Not positive, check a 50