I have a 2001 Volkswagen Beetle the seatbelt chime will not shut off seatbelt chime will shut off when you come to a complete stop than come back on how do I disconnect it altogether

SOURCE: Is there a fuse to pull to stop the seatbelt chime?

Pulling the fuse is not an option.Check your owners manual for instructions on how to shut it off..

Dar

• 2007 Answers
• Posted on Jun 03, 2009

SOURCE: 2001 Volkswagen Beetle, turbo diesel, slow acceleration

Change fuel filter, air filter.

SOURCE: Drivers side seatbelt connected When truck is

sensor in the seat belt bukle needs to be replaced

SOURCE: what does the code po606 mean on a 2001 volkswagen

ECM/PCM Processor malfunction. The 2 corrective actions are either "Check terminal resistance for CAN-Bus" or the bad one, "Replace Motronic Engine Control Module."

As for the first one, if you remove the center dash panel, then, assuming you have Torx scredrivers, remove the panel in front of the speedometer, plus the cover under there, you can make sure that the cables are securely attached. Hopefully that will fix it. If not, you will need to get a new computer for the car. You could try the online vendors, but might have to go to the dealership to get everything matched up correctly. The replacing part is easy, just a few screws holding the unit in place.

SOURCE: need to get timing spec and locate timing marks

Click on the following free, direct Link. It has two sets of Diagrams including the Timing + Marks: Belt Diagrams for your 2001 Volkswagon Bettle 2.0L SOHC 4-Cylinder. The other set of Diagrams is for the 1.8L DOHC 4-Cylinder. Further it has Instructional and Directional Diagrams that will help you out.

Let me know if this helped....

http://www.2carpros.com/car_repair_information/year/2001/make/volkswagen/model/new_beetle/2001_volkswagen_new_beetle_timing_belt_diagram_marks.htm