I just want to know what the standard rate per km is if you use your private vehicle.

Todd Bradshaw

• 141 Answers
• Posted on Feb 17, 2009

SOURCE: Need to find free resources regarding 2003 Kia Rio Cinco Manual

here you go 11 is shift rod end oem# ok2n117423 , 16 shift rail , 18 snap ring , oem # ok30a17486 22 arm

SOURCE: 03 kia rio-24000 km.will valves hit piston if belt breaks?

yep valves will hit piston if timing belt brake.timing belt keep your valves and piston timed.when intake valves and exhaust valve open.piston is on down stroke.the timing belt keep pistons and valves from colliding.your timing belt change is due at 60000 miles.but in some cases belt need to be inspect at 30000 miles.to be on the safe side.

SOURCE: Suspension and transmission:Kia rio 2003

First off I don't think I will be able to answer all your questions but to get a smother ride your going towant to replace the shocks. They army to expensive. Yes a old spark pulg can cause a missfire. A miss fire is when the spark plug doesn't spam in the right area if it were grounding that could be considereda miss fire or if it is not firing at the correct time. The trany fluid keeps yours gears lubricated so they work smothly and helps with cooling. The best way to find out your fluid type is to go to the autoparts store and ask them and they can look it up for you and I would say your braek fluid would be a DOT 4 and your tranny probobly takes like a 60-75 weight oil but I'm not sure I say ask them to be sure.

Testimonial: "Good timely responce, very clear to the point. I will follow your advises up. Thank you."

SOURCE: need to know where knock sensor is located on a 2001 kia rio.

At center rear of engine compartment, by intake manifold support bracket.

SOURCE: location of vehicle speed sensor on 2002 kia rio

IT should be on the driver side pluged into the trans you should be able to see it looking from the front of the car under the hood its held in by one blot.