SOURCE: Mustang GT 4.6 EVAP Canister Purge Valve Location?
You will need to remove the right front wheel & wheel well liner. The canister purge valve is behind the cover. It should have two tube going into the bottom and one on the side near the top.
You can fix it!
If this helps you out please rate me!
Brett
SOURCE: I need to locate the canister purge valve and the
look above the spare tire under the back of the box
SOURCE: emission test showed error code p1443.check engine
You might want to try "google images" just type in your vehicle and what your looking for. Here's an example (link) of what to look for.
http://www.fordmuscle.com/forums/attachments/all-ford-techboard/4132d1212515121-code-p1443-help-96tbird_evap.jpg
SOURCE: Getting an engine code 1450 on a 2003 ford
Did you check the block box connected to the vent solenoid? There's a hose that comes off it that appears to run nowhere, that's the fresh air vent. If it's blocked it won't allow air into the system which will set the trouble code. If that's clear, the vent solenoid itself is bad and needs to be replaced.
SOURCE: where are the vapor canister
I frequently use and highly recommend registering for free at www.autozone.com Your registration gives you access to a variety of repair and shop manuals, most giving you detailed repair instructions and diagrams.
3,807 views
Usually answered in minutes!
×