2004 Ford F150 Logo

Related Topics:

C
Carlos jacquez Posted on Mar 10, 2017

Sterio in my 2009 f 150 stop working only thing that shows up on the display is "fordf150" no clock or sterio show up

5 Related Answers

Anonymous

  • 1305 Answers
  • Posted on May 10, 2009

SOURCE: ive messed with the sterio in my 1986 f250 the

good luck on this ...have fun! that's what old trucks with crazy radios are for!!

Ad

Anonymous

  • 32 Answers
  • Posted on Jun 17, 2009

SOURCE: im installing a new sterio in a 95 mustang ----i

A Right Rear Spkr (-) Dark Brown w/ Pink Stripe Purple w/ Black Stripe
B Right Rear Spkr (+) Tan w/ Green Stripe Purple
C Right Front Spkr (-) Green w/ Orange Stripe Gray w/ Black Stripe
D Right Front Spkr (+) White / Green Stripe Gray
E Left Rear Spkr (-) Tan w/ Yellow Stripe Green w/ Black Stripe
F Left Rear Spkr (+) Tan w/ White Stripe Green
G Left Front Spkr (-) Lite Blue w/ White Stripe White w/ Black Stripe
H Left Front Spkr (+) Orange w/ Green Stripe White
I Amplifier Turn On Do Not Use For This Vehicle
J Power Antenna Turn On Do Not Use For This Vehicle
K Ground Wire Black w/ Green Stripe Black
L Do Not Use For This Vehicle
M Dash Light Dimmer Wire Orange (if available)
N +12 Volt Ignition Wire Thin Black Wire Red
O Do Not Use For This Vehicle
P +12 Volt Battery Wire Green w/ Black Stripe Yellow

Anonymous

  • 19 Answers
  • Posted on Jun 21, 2009

SOURCE: need color code diagram for sterio

I'm not sure what year you have but this color code works for 87-93 mustangs.

Radio Connector:

Light Green / Yellow - Hot at all times (Fuse 8)
Yellow / Black - Hot in ACC or Run (Fuse 11)
Light Brown / Red - Goes to instrument panel dimming rheostat (Fuse 4)
Red - Ground
White / Purple - Hot in ACC or Run (Fuse 11)

Speaker Connector:

White / Light Green - (+) Right Instrument Panel & Door Speaker
Dark Green / Orange - (-) Right Instrument Panel & Door Speaker
Brown / Pink - (+) Right Rear Speaker
Pink / Light Brown - (-) Right Rear Speaker
Pink / Light Green - (+) Left Rear Speaker
Tan / Yellow - (-) Left Rear Speaker
Light Brown / White - (+) Left Instrument Panel & Door Speaker
Orange / Light Green - (-) Left Instrument Panel & Door Speaker
Hope this helps.

Anonymous

  • 135 Answers
  • Posted on Nov 30, 2009

SOURCE: i have lost the code to my escoet sterio as i

you need s/number of side of radio starts with a M-

Anonymous

  • 541 Answers
  • Posted on Jan 13, 2011

SOURCE: I have accidentally locked the

disconnect + battery cable for 5 minutes and re-connect. that should reset the system completly so you can start all over again

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
2answers

Radio display not working

bulbs blown, no easy way to fix, best to put in an aftermarket sterio
1helpful
1answer

Fuse keeps blowing to my dash guages in my 95 gmc sierra why?

have you recently installed a new radio ? I have knowen people to install radiosincorectly the dim wire behind the radio shows as a earth. however when you turn headlights on this becomes a positive. if you have wired this wire to your sterio this is whyyour dash lights & internal cab light etc keep blowing.. if your wondering why sterio still works is because its earthed through the aerial or mounting bolts.
0helpful
1answer

Factory car radio

thoes cars have a proble with the wireing in the factory sterio deck my sugeston would be to take it out and get an aftermarket sterio wnd put that in there that wil should solve your problem and last alot longer
0helpful
1answer

How do i reset a sterio code for a 2000 audi a6

urn on radio - the word SAFE will appear in the display. Press th P.SCAN and RBDS buttons simultaneously and hold them down until "1000" lights up in the display.Release buttons.Do not, under no circumtances, continue holding them down or press them once again. This will cause the radio to consider the number 1000 to be the input code.Use station buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use the button 1 to enter the first number 2 for the second number 3 for the third number and 4 for the last number.Once you have entered the code and it shows on the display,press the P.SCAN and RBDS buttons down again simultaneously and hold them down until the word SAFE appears in the display.Release buttons. Soon afterwards a frequency will be displayed.
0helpful
1answer

Bmw 323i reads phone on display. no response.

maybe you have to try blutooth it if that na work maybe its of on the sterio, sometimes you best to see if you can refere back to the manual, if not try find one for that sterio, as someone before you may have put in a dif connect code, and the sterio needs resetting
0helpful
2answers

Sterio and Power Locks won't work on my 1990 F150

I have a kind the same problem I really don't know is i can help but if the sterio if not factory may been installed wrong. i check the wiring most kid try to put the in and instead of spending the 20 buck to do it right they cut wires . if this happen it may be a pain but you can look and see if any wire been cut to power the clock or something
Not finding what you are looking for?

299 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...