Question about 2005 Mazda Tribute

Open Question

How to change rear wheel bearing 2005 mazda tribute all wheel drive

Posted by on

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
dnewcombe1

Dana Newcombe

  • 1564 Answers

SOURCE: is it hard to change the rear whell bearings on 05

You are probably looking at about an hour per side. Brakes and backing plate must be removed. then the mounting bolts for the axle itself must be removed. this operation should be performed one side at a time in order to save the fluid inside the differential casing. It will become imperative that both oil seals are changed with the bearings. P.S. depending on the graciousness of the engineers, you may not have to remove the backing plates. Thank you, Dana

Posted on Mar 05, 2010

Ad

Anonymous

  • 100 Answers

SOURCE: How many wheel bearings per side on 2002 Mazda Tribute?

Go to carhelpsite.com it is free as long as you click on 2 of the ads at the website then your questions will be answered by an ASE certified mechanic,you don't have to buy or fill out anything on the ads,so help keep the site free.

Posted on Apr 13, 2010

SOURCE: Changing rear wheel bearings on a Mazda tribute

Year ?? VIN # ??

If you need further help, reach me via phone at https://www.6ya.com/expert/ralph_2f0886b7d6af32ce

Posted on May 28, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change rear wheel bearing 2005 mazda tribute


by look of the size of the vehicle
and the rear bearing shows up as a solid

if into a lower control arm
a special tool to press out the solid bearing with control arm on the vehicle
or
rear stub axle off the vehicle and press out the old bearing
press in the new

index-cqneqzyolry2cqerh32anhvg-5-0.jpg051-4171_is-cqneqzyolry2cqerh32anhvg-5-2.jpg

Mar 05, 2017 | Mazda Cars & Trucks

1 Answer

Replace rear wheel bearing on Tribute 2005..FWD


Jack up the car and place on stands remove wheels ,remove pin and nut ,remove the brake caliper,slide hub off ,remove old cup,s with a hammer and pin punch and fit new cups pack bearings with grease fit to hub,fit new seal.

Oct 09, 2016 | 2005 Mazda Tribute

1 Answer

I have a 2005 Mazda tribute and while driving the transmission shifts from drive to 1st, then 2nd, then drive and it will do this off and on the entire time I am driving. The fluid looks clean.


Mazda Tribute Transmission Problems - Edmunds.com

forums.edmunds.com > Mazda > Mazda Tribute

Dec 6, 2007 - 31 posts - ‎20 authors
In March 2005 I purchased my brand new Mazda Tribute. ... When the transmissionproblems first started I explained to Mazda that I .... The whole four wheel drive! ...While they were driving on the freeway, the engine revved a little. ... When it isshifting into or out of overdrive around 50 mph sometimes the ... Mercury Mariner Transmission Problems
31 posts
Apr 5, 2007
Nissan Quest Transmission Problems
31 posts
Nov 7, 2006
Mazda Tribute Gear Selector
15 posts
Aug 2, 2006
More results from forums.edmunds.com

2004 Mazda Tribute / Ford Escape Transmission trouble ...



Jan 14, 2016 | 2005 Mazda Tribute

1 Answer

Is it hard to change the rear whell bearings on 05


You are probably looking at about an hour per side. Brakes and backing plate must be removed. then the mounting bolts for the axle itself must be removed. this operation should be performed one side at a time in order to save the fluid inside the differential casing. It will become imperative that both oil seals are changed with the bearings. P.S. depending on the graciousness of the engineers, you may not have to remove the backing plates. Thank you, Dana

Mar 05, 2010 | 2005 Mazda Tribute

2 Answers

2005 ford escape 3.0L AWD XLT - DRIVESHAFT CARRIER BEARING BAD - CAN IT BE REPLACED OR MUST I CHANGE THE DRIVESHAFT FRONT AND REAR?


if there is some one in your area that balances driveshafts they can change just the bearing for you

Nov 10, 2009 | 2004 Ford Escape

2 Answers

Loud noise inside the car when driving at high speed and even low speed


with the short description you gave, If I was to take a guess I would say you have a wheel bearing noise. Mazdas are very common for this problem.

Good Luck and I hope this helps a little.

Allen

swiftautorepairs.com

Oct 06, 2009 | 2005 Mazda Tribute

2 Answers

Mazda Tribute 2005. 172000 km. Vibrations


Could be ball joints loose...jack up wheel and check for play
Could be bad hubs...the metal part of the tire wheel...i had this problem once..check for obvious damage like a dent or cut in metal
Could be caliper sticking
Could be mud in and around the wheels

Dec 20, 2008 | 2004 Mazda Tribute

Not finding what you are looking for?
2005 Mazda Tribute Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...