I need to replace the window cable in my passat

Needs a new window regulator mechanism. VW window regulator problems are very common. The plastic cable guide wheels break and window drops down or jambs.

Last one I did was about $180.00 for a VW oe regulator kit.

The serpentine belt routing diagram for 2003 VW Passat V5 2.3 liter


CS = Crankshaft
F = Fan pulley
Gen = Alternator
G = Guide pulley
T = Tensioner pulley
AC = Air Conditioning
PAS = Power Assisted Steering

sounds like your window regulator is going out

go to www.passatworld.com and post your question.

definetly have to remove the inner. i would have to imagine that if it came off then you have to replace it, it is probably frayed or twisted. if it is frayed or twisted, there is no way to fix it. you have to replace it.

This requires a complete window regulator replacement, best done by a professional.

Their is no regulator problem here. The motor is fine.

What broke was a piece of plastic the locks the cable on the track.

Pretty much screwed. VW or an auto glass company wont help.

I have replaced all of my Passats window mechanisms.
I have even remade the piece that broke and saved my self $100.

All in all the panel is removed, THen the inner plates 12 bolts are removed. The window has to be taken out....

Not too much fun,....

Hope this helps.

Sketchlab.com
Mug SHot Collection

the regulator has broken.you will need a new one.they do repair kits for golfs and beetles but not for passats you have to replace the whole regulator.dont attempt it unless 100% confident they can be tricky.

Seeing you have a GLS edition... most of them have at least a power DRIVERS seat. I own a 2003 GLX v6 and it comes with both front seats powered and heated. i hope this helps!

Do you have the metal assebly completely in front of you? And you've made sure all the cables are passed the same. If yes there should be an arrow type area on each pulley? Also each pulley should have a smaller and a larger area?