Installation instructions for replacing passenger side mirror on 2012 Chrysler 200

SOURCE: installing a Nissan Sentra Passenger Side Manual Non Folding Mirror.

had to install a driver side non folding mirror, fairly simply to say the least. There's a cover on the interior of the door, near the window, remove the cover, remove the 3 screws, need i believe a 10mm socket. If a power window, unhook the circuit. Replace new mirror.

Ginko

• 19396 Answers
• Posted on Oct 30, 2008

SOURCE: Replace the review mirror

You need to remove the plastic plate that cover the mirror joint from the inside and undo the three bolts.

SOURCE: instructions for replacement of side view mirror

the door panel near the mirror must be removed if not the entire door panel inside u will find 3 nuts to remove to get the old mirror off. hope this helps please rate me

SOURCE: Replacing mirror on 1998 Oldsmobile Silhouette

you'll need to remove your door panel (screws are by the door handle, arm rest, under door and side of door) and remove the cover adjacent to your mirror to remove the bolts to remove the mirror.

SOURCE: replace passenger side mirror on 2008 Impala

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door