Question about 2001 Chrysler Town & Country

Open Question

Installed a good transmission in a 2001 town and country but it won't shift

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
short shadey
  • 421 Answers

SOURCE: transmission

you need to have the trouble codes read go to autozone they can read them for you and write them down and report back it is most likley a speed sensor on the transmission there is two of them and they are very cheap and easy to change called input /output speed sensors
1 05014469AA Wiring Repair Package, Input Speed Sensor
1 05014471AA Wiring Repair Package, Output Speed Sensor you dont need to use the wiring harness supllied with these sensors as they are for early model vans only please rate -jeff

Posted on Sep 04, 2008

Ad
emissionwiz
  • 85206 Answers

SOURCE: i have a problem with power sliding doors on 2001 Chrysler Town and Country limited

do you mean they are sticking?

Posted on Oct 20, 2008

  • 110 Answers

SOURCE: radio wont turn on town & country

try putting the code in

Posted on Nov 17, 2008

keemo68
  • 1263 Answers

SOURCE: radiator fan relay,2001 chrysler town country

the relay is located in the power distribution box under the hood the relay will be a square black or gray cube just pull out and make sure you rerplace it with the same type relay. refer to your owners manual for any questions regarding the fuses and relays

Posted on May 08, 2009

  • 1 Answer

SOURCE: country speedometer doesn't work and won't shift out of 1st gear

transmission speed sensor needs replacing about 40.oo$ at the dealer sits on the right side of transmission looking from the front of the radiator g s.

Posted on Jun 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why my 2001 town & country 3.8 will not shift gears?


p1784 shift up /down wire open,,,P0700 Transmission Control System Malfunction

Read more at: http://www.obd-codes.com/trouble_codes/
Copyright © OBD-Codes.com

P0732 Gear 2 Incorrect ratio

Read more at: http://www.obd-codes.com/trouble_codes/
Copyright © OBD-Codes.com

Apr 23, 2015 | 2001 Chrysler Town & Country

1 Answer

Shift solenoid


Unfortunately tranny has to be taken out .pretty complicated solenoids deep inside..good luck

Nov 02, 2013 | 2001 Chrysler Town & Country

1 Answer

When I shift into drive my speedometer jumps up to 20 mph


check all your fuses. if you boosted it before changing starter there is a chance u blew a fuse. I would disconect battery and wait 60seconds then re attach to reset the computer

Mar 14, 2013 | 2001 Chrysler Town & Country

1 Answer

My Chrysler Town and Country 2001 is in limp mode.


you cant get rid of the issue until you find the cause and fix it. i would not recommend throwing any more parts at it, get someone with a scan tool and see what codes are there before you waste any more money
.

May 21, 2012 | 2001 Chrysler Town & Country

2 Answers

2001 chrysler town country limited. Check engine light is on with a code P740. transmission shifts very well .What is up with this code and what needs to be replaced? also the ac is cold on the passenger...


P0740 Torque Converter Clutch Circuit Malfunction, it could be a sensor starting to go bad, have the code cleared and see if it happens again, have you ever had your transmission fluid replaced, (do not have it flushed) might want to do that as a Preventive Maintenance item.

A/C problem could be the A/C controls on the dash are not working properly, the doors inside the dash are not closing completely, letting warm blended air in on the driver's side.

May 25, 2010 | 2001 Chrysler Town & Country

1 Answer

I have a 2001 town and country. yesterday i went to put it into park and it sounded like a clunk. Like it shifted really hard and now my transmission is stuck in 2nd gear. I took the negative batterey...


This is called the limp mode. It means that you have a transmission problem. It goes into limp mode to protect the transmission from total failure. You need to take it to a transmission shop to perform a diagnosic test to see if it needs repair or replace

Jul 11, 2009 | 2009 Chrysler Town and Country

1 Answer

Country speedometer doesn't work and won't shift out of 1st gear


transmission speed sensor needs replacing about 40.oo$ at the dealer sits on the right side of transmission looking from the front of the radiator g s.

Apr 17, 2009 | 2001 Chrysler Town & Country

3 Answers

Code0755 shift solenoid b after about ten miles next day whilst driving in fourth transmission goes into second


If you were to take the solenoid pack apart you would find a bad connection on that solenoid. You sill need a new pack installed.

Aug 11, 2008 | 1993 Chrysler Town & Country

Not finding what you are looking for?
2001 Chrysler Town & Country Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...