Sunroof fuse, 1998 GMC SONOMA - 1998 GMC Sonoma

Question edited for clarity.
Question moved to model category.

In the link

https://www.google.com/search?q=1998+gmc+sonoma+2.2+firing+order

..

https://www.justanswer.com/chevy/7zpyg-chevrolet-s-10-blazer-4wd-4-3-1998-s-10-blazer-4wd-vortec.html

this link may help you ... although not the exact year and model.

GMC Sonoma Maintenance & Repair Questions - CarGurus

www.cargurus.com > Questions > GMC > Sonoma

CarGurusGet fast answers to your GMC Sonoma Maintenance & Repair questions from experts in the CarGurus ... My 1999 Gmc Sonoma 4.3 Will Start But Will Stay Running ...1991 gmc sonoma 2.8 l v6 changed everything in the fuel and ignition system except for the ... Why Is The Engien Dying When The Ecm-batt Fuse Burns Out?

can you bypass the fuel pump relay on a 1997 gmc sonoma

www.cargurus.com > Questions > GMC > Sonoma

CarGurusAug 7, 2014 - can you bypass the fuel pump relay on a 1997 gmc sonoma - I have no power at the pump. can i run a new positive lead from the fuse box straight to the pump... ... Question type: Maintenance & Repair ... 1991 gmc sonoma 2.8 l v6 changed everything in the fuel and ignition system except for the spark ...

GMC Sonoma Questions - wiring diagram for a 1995 gmc ...

images for 1991 chevy s10 wiring

No, there isn't a switch. Check the trans fuse.Could be eatx fuse. Could be the transmission is old and tired.

Hello,

Open the bonnet of your 1998 GMC Sonoma, look under the radiator, you will see a hose/pipe coming out of the radiator going into the engine of the 1998 GMC Sonoma. Remove the hose and the coolant will drain.

You will see a screw holding the hose to the engine, get a screw driver to loosen the screw so that the hose can be easily removed.

After draining, pour more water into the radiator to flush out the coolant entirely from the radiator.

I hope this helps.

Good luck.

the engine actually runs off the alternator not the battery i would check the alternator and it has a main fuse that handles everthing

almost always it is the switch that is the problem.

You want to look under the hood near the firewall on the drivers side. The fuse should be marked "guages".

take the dash apart on the driver side and it will be up in the cluster panel