How to take off head rest on 1997 mercury cougar

Richard Bailey

• 5 Answers
• Posted on May 05, 2009

SOURCE: 1997 Mercury Cougar

There should be a diagram of how the belt goes on right under the hood, right next to the radiator, if it is gone then go to "autozone.com" and look up the info there.

SOURCE: Where is the ac low pressure side port on 1997 Cougar

Its on the Passenger side of the engine bay between the strut tower and the valve cover. It should have a blue cap on it, or maybe a black cap. Follow the ac line coming out of the back of the compressor and youll see it.

SOURCE: torque value on 2001 mercury cougar head bolts and

cylinder head bolts

step 1 30 ft lbs.

step 2 additinoal 90 degrees

step 3 loosen all bolts 360 degrees

step 4 30 ft lbs.

step 5 additional 90 degrees

step 6 additional 90 degrees

camshaft bearing cap bolts 89 inch lbs.

SOURCE: 1997 Mercury Cougar Brake Fluid Reservoir Hose

down side of master cylinder.

SOURCE: where is ignition control module on a mercury cougar rx7 1997 located

The switch is located under the hood of the vehicle and is attached to the brake master cylinder and wired to the cruise control.


-----------------------------------------------------------
NEC Dash Programmer ECU Flasher